Advanced Connection: Connecting Your Vcr Controller - Sony SAT-W60 Installation Manual

01USBook.BOOK Page 14 Wednesday, July 5, 2000 12:24 PM
Digital Satellite Receiver/Recorder
Advanced Connection: Connecting Your IR
Blaster
Digital Satellite Receiver/Recorder
VCR (front)
z Tip
If the infrared sensor is not
marked on your VCR, shine a
flashlight into the front panel of
the VCR to locate the sensor.
14
1
IR Sensor
2
/ " to 1
1
2
To allow the Digital Satellite
1
Receiver/Recorder to control
your VCR
Connect the IR Blaster to the VCR
CONTROLLER jack on the
receiver/recorder.
In front of the VCR
2
Place the IR Blaster under and
"
in front of the VCR.
The IR Blaster must extend just
in front of the infrared sensor
of the VCR.