Making Advanced Connections; Advanced Connection: Connecting Your Vcr - Sony SAT-W60 Installation Manual

Digital satellite receiver/recorder
Hide thumbs Also See for SAT-W60:
Table of Contents

Advertisement

01USBook.BOOK Page 13 Wednesday, July 5, 2000 12:24 PM

Advanced Connection: Connecting Your VCR

Digital Satellite Receiver/Recorder
1c
1b
If your TV and VCR have S-Video jacks
1b
Use an S-Video cable instead of the yellow video connection. S-Video cable is
supplied.
z Tip
To allow your Digital Satellite Receiver/
Recorder to control the recording functions of
your VCR, see page 14.
If your TV and VCR do not have A/V jacks
1c
Connect the VHF(SAT)/UHF OUT jack on the Digital Satellite Receiver/Recorder to the
VHF/UHF input jack on your VCR using coaxial cable.
Then, connect the VHF/UHF output jack on your VCR to the VHF/UHF input jack on
your TV using a second coaxial cable.
Set the CH3/CH4 switch to the channel that does not carry off-air broadcasts in your area
Note
With this connection, your input source is
channel 3 or channel 4 depending on how
you set the CH3/CH4 switch on your VCR.
Connecting Your Receiver/Recorder
1
If your TV and VCR have A/V jacks
1
Connect the VIDEO OUT jacks of your Digital
Satellite Receiver/Recorder to the A/V input
jacks of your VCR using the supplied A/V
cable. Then, connect the A/V output jacks of
your VCR to the A/V input jacks of your TV
using an A/V cable. (Be sure to match the
colors on the jacks with the colored plugs on
VCR
the A/V cable.) Some TVs and VCRs do not
have stereo audio, if yours does not, just
connect the white A/V cable to the Left output
jack.
13

Advertisement

Table of Contents
loading

Table of Contents