Step 4: Connecting The Ir Controller (Advanced Connection) - Sony SAT-T60 Installation Manual

Connect the IR Controller to the IR
1
CNTRL OUT jack on the Satellite
Receiver.
2 Place the IR Controller under and in
front of the VCR.
The IR Controller must extend just in
front of the infrared sensor of the VCR.
z
Tip
If the infrared sensor is not marked on
your Sony VCR, refer to your VCR's
operating instructions.
22
Step 4: Connecting the IR Controller
(Advanced Connection)
If you connected a Sony VCR in Step 3, you can let the Satellite Receiver
control recording functions by connecting the IR (Infrared) Controller.
Satellite Receiver
AC In
ACCESS CARD
SATELLITE IN CNTRL
TEL LINE
OUT
2 1
SERIAL
OPTIONAL REQUIRED
IR
1
IR Controller
IR Sensor
VCR (front view)
2
1 / " to 1 "
2
IR Controller
OUTPUT DIGITAL
VHF/UHF IN
AUDIO OUT
2 1
(OPTICAL)
POWER OFF
PASS-THRU
ONLY
VHF/UHF (SAT) OUT
CH
3 4
VHF/UHF
POWER OFF
PASS-THRU
S-VIDEO