Performing A Hotsync ® Operation Between Your Old Clié Handheld And The New Palm Desktop For Clié Software - Sony CLIE PEG-SL10 Operating Instructions Manual

Using data of another Sony CLIÉ Handheld
Performing a HotSync
handheld and the new Palm Desktop for CLIÉ software
If you already own a CLIÉ handheld before PEG-SL10/PEG-SJ20/PEG-SJ30,
you can perform a HotSync operation between that CLIÉ handheld and the
Palm Desktop for CLIÉ software supplied with the PEG-SL10/PEG-SJ20/
PEG-SJ30.
After setting up your CLIÉ handheld as indicated in the Read This First
manual, perform the HotSync operation as indicated on page 103.
If you have any trouble with the HotSync operation, perform the following.
• Check the Windows task tray to make sure that Local USB is selected.
• Check the Windows task tray to make sure that the USB Switcher is
running (PEG-S300, PEG-N710C only).
Note
The Palm Desktop for CLIÉ software supplied with the PEG-SL10/PEG-SJ20/PEG-SJ30
does not support "Expense."
Chapter 6
Additional information
®
operation between your old CLIÉ
193