Customizing Hotsync Manager Startup And Hotsync Setup Options; Customizing Hotsync ® Manager Startup And Hotsync ® Setup Options - Sony CLIE PEG-TG50 Handbook

Customizing HotSync
®
HotSync
1
Click the HotSync
select Setup from the shortcut menu.
The Setup dialog box is displayed.
2
Click the General tab and select the setting as needed.
If you are not sure which option to use, select Always available.
• Always available: Starts the HotSync
starts. This allows you to perform a HotSync
Palm™ Desktop for CLIÉ software is not running.
• Available only when the Palm™ Desktop is running: Starts the
HotSync
software.
• Manual: Starts the HotSync
HotSync
3
Click the Local tab and adjust the setting for the connection
between the computer and cradle as needed.
• Serial port: Specifies the computer port that is used for a HotSync
operation. Make sure that the serial port for HotSync
the port for modem.
• Speed: Determines the speed at which data is transferred. Try the As
Fast As Possible rate first, and adjust downward if you have any
problems.
4
Click the Modem tab and select the setting for the modem
as needed.
b
For details, refer to "Performing a HotSync
112.
5
Click the Network tab and select the setting for the network
as needed.
6
Click OK to finish.
Exchanging and updating data using a HotSync
®
(Other HotSync operations)
®
setup options
icon in the Windows task tray and
®
Manager when you start the Palm™ Desktop for CLIÉ
®
Manager from the Windows Start menu.
Manager startup and
®
Manager when Windows
®
operation even when the
®
Manager only when you select
®
operation via a modem" on page
®
operation
®
®
is not shared with
104