Step 6: Performing A Hotsync Operation For The First Time; Step 6: Performing A Hotsync ® Operation For The First Time - Sony PEG-S360 Add-on Application User Manual

Step 6: Performing a HotSync
for the first time
What is a HotSync operation?
HotSync, a technology particular to a Palm OS
one-step operation that allows you to synchronize data between your
CLIÉ handheld and your computer and to back up the CLIÉ data on
your computer. For details, see "Exchanging and updating data using
®
a HotSync operation" in the Operating Instructions manual.
When performing a HotSync
enter your user information both into your CLIÉ handheld and into the
Palm Desktop for CLIÉ software. After the user name is recognized,
you do not have to enter this information again.
1
On your CLIÉ handheld, rotate the Jog Dial™ navigator
to select HotSync and then press the Jog Dial navigator.
Or tap the HotSync
screen (page 38).
The HotSync screen appears on your CLIÉ handheld.
On your computer screen, the USB Driver Installation Wizard starts
automatically.
2
On the HotSync screen of your CLIÉ handheld, tap the
HotSync
A beep sounds and the HotSync operation starts.
3
When the New User dialog box is displayed on your
computer screen, enter the user name.
Enter the same user name you entered in step 8 on page 31.
Note
Every handheld should have a unique name. To prevent loss of a user's
records, never try to synchronize more than one handheld to the same user
name.
4
Click OK on your computer screen.
When the HotSync process is complete, a message showing the
HotSync operation completion is displayed on your CLIÉ handheld.
34
®
operation for the first time, you must
icon on the Application Launcher
icon.
®
operation
®
platform device, is the