Addition - Expanding An Additional Network - Devolo dLAN 1000 duo+ Manual

dLAN network encryption by entering the dLAN
b
password in the devolo Cockpit: More information
can be found in Chapter 4.3 devolo Cockpit.
As soon as the white LED lights up steady on
both devices, your dLAN network is set up
and protected from unauthorised access.
3.3.2 Addition – Expanding an additional
network
Plug the dLAN 1000 duo+ into a wall socket. As
soon as the LED indicator light flashes red at regu-
lar intervals of 0.5 sec., the adapter is ready to
operate but not yet integrated into the dLAN
network.
Integrating the dLAN 1000 duo+ into an existing
dLAN network
Before you can use the dLAN 1000 duo+ in your dLAN
network, first you have to connect it to your
dLAN devices as a network. This is accomplished by us-
ing a shared dLAN password. The dLAN password can
be set in different ways:
dLAN network encryption:
dLAN network encryption: at the touch of a but-
b
ton: First press the encryption button on a device
in your existing network for approx. 1 second
and within 2 minutes, press the encryption but-
ton of the new dLAN 1000 duo+ for approx. 1
second.
or
dLAN network encryption by entering the dLAN
b
password in the devolo Cockpit: More information
can be found in Chapter 4.3 devolo Cockpit.
As soon as the white LED lights up steady,
the new dLAN 1000 duo+ is integrated into
your existing, encrypted dLAN network.
existing
Initial use 14
devolo dLAN 1000 duo+