Related Manuals for SHOWTEC Medium Studiobeam Tour Q4 4-in-1 LED V2
Summary of Contents for SHOWTEC Medium Studiobeam Tour Q4 4-in-1 LED V2
- Page 1 MANUAL ENGLISH Medium Studiobeam Tour Q4 4-in-1 LED Ordercode: 42487 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Medium Studiobeam Tour Q4 4-in-1 LED Table of contents Warning ................................... 2 Safety Instructions ..............................2 Operating Determinations ............................4 Rigging ..................................4 Connection with the mains ............................. 5 Return Procedure ..............................6 Claims ..................................6 ... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Medium Studiobeam Tour Q4 4-in-1 LED 1 x color frame ... - Page 4 • If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
Medium Studiobeam Tour Q4 4-in-1 LED • The user is responsible for correct positioning and operating of the Studiobeam. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device. • This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth. -
Page 6: Connection With The Mains
Medium Studiobeam Tour Q4 4-in-1 LED The Studiobeam can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. -
Page 7: Return Procedure
Medium Studiobeam Tour Q4 4-in-1 LED Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture. -
Page 8: Description Of The Device
Medium Studiobeam Tour Q4 4-in-1 LED Description of the device Features The Medium Studiobeam Tour Q4 4-in-1 LED is an ultra-compact light effect with high output and great effects. The Studiobeam is the ideal solution for small clubs and mobile DJs. ... -
Page 9: Backside
Medium Studiobeam Tour Q4 4-in-1 LED Backside Fig. 02 06) Ground/earth connection 07) PowerCON power connector 100-240V IN 08) PowerCON power connector 100-240V OUT 09) 4-digit LED display + menu buttons Installation Remove all packing materials from the Medium Studiobeam Q4 4-in-1 LED. Check if all foam and plastic padding is removed. -
Page 10: Color Frame Retaining Clip
Medium Studiobeam Tour Q4 4-in-1 LED Color frame retaining clip The color frame holder is equipped with a spring-loaded retaining clip. This prevents color frames and accessories from falling out. Make sure that all color frame accessories are locked in position with the retaining clip before hanging the Studiobeam. -
Page 11: Control Modes
Medium Studiobeam Tour Q4 4-in-1 LED Control Modes There are 6 modes: • Built-in programs • Static Color Presets • Manual Mode • Sound-controlled • Master/Slave • DMX-512 (4CH, 6CH) One Studiobeam (Built-in programs, Manual Mode and Static Colors) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Plug the end of the electric mains power cord into a proper electric power supply socket. -
Page 12: Multiple Studiobeams (Dmx Control)
Medium Studiobeam Tour Q4 4-in-1 LED Multiple Studiobeams (DMX Control) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Use a 3-pin XLR cable to connect the Studiobeams and other devices. -
Page 13: Fixture Linking
Medium Studiobeam Tour Q4 4-in-1 LED Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. -
Page 14: Control Panel
Medium Studiobeam Tour Q4 4-in-1 LED The Medium Studiobeam Tour Q4 4-in-1 LED can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel A) LED display MODE button C) UP button D) DOWN button Fig. -
Page 15: Menu Overview
Medium Studiobeam Tour Q4 4-in-1 LED Menu Overview Ordercode: 42487... -
Page 16: Main Menu Options
Medium Studiobeam Tour Q4 4-in-1 LED Main Menu Options Display ON/OFF 4-channel Mode 6-channel Mode Master/Slave Mode Static Color Mode Built-in programs Program speed settings Sound-controlled Mode Red LED intensity (Manual Mode) Green LED intensity (Manual Mode) Blue LED intensity (Manual Mode) White LED intensity (Manual Mode) 1. -
Page 17: Built-In Programs
Medium Studiobeam Tour Q4 4-in-1 LED 6. Built-in programs With this menu, you can set the built-in programs. 01) Press the MODE button until the display shows 02) Press the UP/DOWN buttons to toggle between the 9 built-in programs. 7. Program speed settings With this menu, you can set the speed of the built-in programs. -
Page 18: Dmx Channels
Medium Studiobeam Tour Q4 4-in-1 LED DMX Channels 4 channels Channel 1 – Red 0-255 Gradual adjustment Red, from 0-100% Channel 2 – Green 0-255 Gradual adjustment Green, from 0-100% Channel 3 – Blue 0-255 Gradual adjustment Blue, from 0-100% Channel 4 –... -
Page 19: Maintenance
Suspect two potential problem areas as: the power supply and the LEDs. 01) Power supply. Check that the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Studiobeam to your Showtec dealer. 03) If both of the above appear to be O.K., plug the unit in again. - Page 20 Check if power is switched on and cables are plugged in No power to the fixture One or more fixtures do not function at all • Return the fixture to your Showtec Internal fuse blown dealer. Fixtures reset The controller is not connected. • Connect controller.
-
Page 21: Product Specifications
Medium Studiobeam Tour Q4 4-in-1 LED Product Specifications Model: Showtec Medium Studiobeam Tour Q4 4-in-1 LED Input voltage: 100-240V AC, 50/60Hz Power consumption: 38W (full output) DMX linking: 30pcs Dimensions: 240 x 182 x 230 mm (LxWxH) Weight: 1,8 kg... -
Page 22: Dimensions
Medium Studiobeam Tour Q4 4-in-1 LED Dimensions Ordercode: 42487... - Page 23 Medium Studiobeam Tour Q4 4-in-1 LED Ordercode: 42487...
- Page 24 ©2017 Showtec...