Table of Contents
Advertisement
The dialler can work on 2G & 4G networks. The module works worldwide with all
simcards (see page 3 for applicable bands). You can choose which frequency the unit will
use at the start by using the dipswitch combinations below
Dipswitch 1 Set to OFF
Dipswitch 1 Set to ON
Dipswitch 2 not used
After inserting your simcard into the Auto Dialler turn the unit on and wait until you see the
GREEN
LED is on. This will indicate that you have a mobile signal and the unit is ready for
Use.
You will now need to send a text with the contact numbers (maximum 5 contact numbers).
To avoid confusion we have colour coded the (#)
Example (hash) (1,2,3,4 or 5) (equals) (phone number) (hash)
#1=07123456789#
#2=07234567891#
#3=07234567867#
#4=07234567822#
#5=07345678912#
Please exchange the mobile numbers for your contact numbers
If you wish to cancel a number follow this example
Example: (hash) (1,2,3,4 or 5) (equals) (DELETE) (hash)
#1=DELETE#
This deletes contact number 1
Please send one message at a time and wait for the Auto Dialler to respond with the text
message acknowledgment "NUMBER STORED" before you try to add another number.
Below is a notepad to help you to remember which numbers you have saved to which
location in the event you need to modify or delete them in the future.
#1=____________________#
#2=____________________#
#3=____________________#
#4=____________________#
#5=____________________#
www.gsm-activate.co.uk
Dipswitch
= Unit boots up in 2G
= Unit boots up in 4G
Programming the Contact Numbers
send this as a text to the simcard number in the unit for contact no:1
send this as a text to the simcard number in the unit for contact no:2
send this as a text to the simcard number in the unit for contact no:3
send this as a text to the simcard number in the unit for contact no:4
send this as a text to the simcard number in the unit for contact no:5
IMPORTANT - PLEASE READ
Page 4
- 01273462380 - sales@gsm-activate.co.uk
hash
and (=)
equals
symbols.
Advertisement
Table of Contents
