WA4700NH_DC68-03980A-00_EN.indd 17
WA4700NH_DC68-03980A-00_EN.indd 17
Pump type
A
1. Open the hose cap (A), and insert the
drain hose. Tighten the drain hose using
the joint ring.
NOTE
•
The position (side or rear) of the drain
outlet depends on the model.
•
Availability of the hose cap depends on
the model.
2. Connect the other end of the drain hose
to a standpipe or basin that is positioned
90-100 cm (*) from the floor.
WARNING
Make sure the end of the drain hose is
not submerged by water. Otherwise, the
washing machine may suffer serious
damage.
English 17
2018-07-17
2018-07-17
3:06:53
3:06:53