Controller Settings; Enable Cloud-Based Controller Management - TP-Link AP9635 User Manual

5.2 Controller Settings

To make your controller adopt your AP, make sure the AP can be discovered by the
controller. Controller Settings enable your AP to be discovered in either of the following
scenarios.
• If you are using Omada Pro Cloud-Based Controller,
Management
• If your AP and controller are located in the same network, LAN and VLAN, the controller
can discover and adopt the AP without any controller settings. Otherwise, you need to
inform the AP of the controller's URL/IP address, and one possible way is to
Controller Inform URL
For details about the whole procedure, refer to the User Guide of Omada Pro SDN
Controller. The guide can be found on the download center of our official website:
https://www.tp-link.com/support/download/

Enable Cloud-Based Controller Management

Go to the System > Controller Settings page. In the Cloud- Based Controller Management
section, enable Cloud-Based Controller Management and click Save. After you add the AP
to your Cloud-Based Controller, you can check the connection status on this page.
.
.
Enable Cloud-Based Controller
95
Configure