Daily Use - AEG 911535221 User Manual

7.2 How to fill the rinse aid
dispenser
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.

8. DAILY USE

1. Open the water tap.
2. Press and hold
is activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is
empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the
programme is complete.
8.1 Using the detergent
A
1. Press the release button (B) to open
the lid (C).
A D B
A
-
+
until the appliance
B
C
1. Press the release button (D) to open
the lid (C).
2. Pour the rinse aid in the dispenser (A)
until the liquid reaches the fill level
'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity (B)
between position 1 (lowest
C
quantity) and position 4 or 6
(highest quantity).
2. Put the detergent, in powder or
tablets, in the compartment (A).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the
release button locks into position.
8.2 How to select and start a
programme using MY TIME
selection bar
1. Press the button dedicated to the
programme you want to select.
The light related to the button is on.
2. Activate ExtraPower if desired.
3. Close the appliance door to start the
programme.
8.3 How to activate
ExtraPower
1. Select a programme using MY TIME
selection bar.
2. Press
The light related to the button is on.
ENGLISH
.
13