Flasher; Simulator - Garmin Fishfinder 240 Owner's Manual

Table of Contents

www.reelschematic.com

Remember when setting the Noise Reject tool, the higher the noise rejection

setting, the more likely the unit is to not show ﬁ sh or structure.

To Change the Noise Reject Setting:

1. Highlight the 'Tools' tab on the Setup Menu.

2. Highlight the 'Noise Reject' selection ﬁ eld and press ENTER.

3. Choose 'Off', 'Auto', 'Low', 'Med', or 'High', and press ENTER.

Flasher

With the 'Flasher' tool active, a graphic Flasher representation will be

displayed on the right side of the chart. This graphic Flasher displays

structure and bottom returns much the same as a true Flasher. You may

find this feature particularly useful when using 'Fish Symbols'.

To Turn the Graphic Flasher On and Off:

1. Highlight the 'Tools' tab on the Setup Menu

2. Highlight the 'Flasher' selection ﬁ eld and press ENTER.

3. Select 'ON' or 'OFF' and press ENTER to accept the selection.

The 'Simulator' tool allows you to select a transducer type for use with

the Fishfinder 240' s built in simulator. These choices allow the simulator

to more accurately depict actual operation of the unit. For details on using

the simulator see page 33.

Unit Operation

Setup Menu/Tools

Graphic Flasher Selections

Simulator Selections

Table of Contents