Using "Av2 Input" (Av2); When Connecting The Rear Display; When Using A Rear Display Connected To Rear Video Output - Pioneer AVIC-F20BT Installation Manual

Section
03 Connecting the System

Using "AV2 Input" (AV2)

The navigation unit
RCA connector
Yellow
(VIDEO INPUT)
To video output
External video
component
(sold separately)
! It is necessary to set "AV2 Input" in "AV
Settings" to "Video" when connecting the
external video component. (For details,
refer to Operation Manual.)
18
Engb
(*1)
AVIC-F20BT
20 cm (*1)
(*2)
23 cm (*2)
AVIC-F920BT
Red, white
(AUDIO INPUT)
RCA cables
(sold separately)
To audio outputs
When connecting the rear
display
The navigation unit
15 cm
RCA connector
Yellow
(REAR MONITOR
OUTPUT)
RCA cables
(sold separately)
To video input
Rear display with
RCA input jacks
When using a rear display
connected to rear video output
WARNING
NEVER install the rear display in a location
that enables the driver to watch the video
source while driving.
This navigation system's rear video output is for
connection of a display to enable passengers in
the rear seats to watch the video source.
This connection
is available for
AVIC-F20BT.
Red, white
(REAR MONITOR
OUTPUT)
RCA cables
(sold separately)
To audio inputs