Table of Contents
Advertisement
PROGRAMMING - H3E/X ELEMENT
For H3E models - S.W. 2.17 and above
For H3X models - S.W. 5.11 and above
P1: Model selection. H5H, H5L, H3 toggle through model numbers with +/-.
NOTE: Not used on H3E models.
P2: Press and release the hidden button. The display will show P2. Display will now show
the "SET" temperature. Press the (+) button to increase the temperature set point, or
the (-) button to decrease the set point.
Range: 15°C (60°F) to 96°C (205°F). Default: 93°C (200°F)
P3: After the Tank Temperature is entered, press and release the hidden button once
more. The display will read P3, then show the ready temperature set point.
Range: 2°C (2°F) to 10°C (20°F) below the "SET" temperature. Default: 5°F.
Press the (+) button to increase, or the (-) button to decrease the set point.
P4: Press and release the hidden button once more. The display will read P4. This
screen will allow you to turn the "Auto" energy save mode ON/OFF. Default: OFF.
NOTE: Turning off this function will disable "P5" - "P6".
P5: Press and release the hidden button once more. The display will read P5.
This will toggle the energy save mode from 60°C (140°F) or tank heater "OFF".
Continued
®
18
Advertisement
Table of Contents
