Siemens SIMATIC HMI 177 Operating Instructions Manual page 30

Mounting and Connection
4.2 Connecting the terminal box
Example for setting the box ID
Figure 4-6
①
②
The figure shows the set address 27H, which is the same as address 39 in decimal format.
Procedure
Proceed as follows:
1. Open the terminal box.
2. Use a screwdriver to set the box ID
3. Closing the terminal box
Result
The box ID is set.
See also
Opening and closing the terminal box (Page 4-3)
4-8
Example for the address "27H"
Rotary encoding switch for more significant bits
Rotary encoding switch for less significant bits
The input is in hexadecimal format Values between 0 and 255 can be set in decimal
format.
Mobile Panel 177 (WinCC flexible)
Operating Instructions (Compact), Edition 07/2005