Cleaning - Sharper Image SPIN 10 Owner's Manual

CLEANING

WARNING: To reduce the risk of electrical shock and injury to persons, unplug the
circulator before removing grille or blade.
GRILLE REMOVAL (Screwdriver required)
1. Power off and unplug unit.
2. Remove 6 screws located at the 12, 2, 4, 6, 8, 10 o'clock positions on the back of
the fan head.
3. Remove front grille.
4. Dust or wash Front Grille with a mild dishwashing soap. Do not place grille in the
dishwasher. The excessive heat can distort the plastic.
BLADE REMOVAL
1. Power off and unplug unit.
2. Rotate blade nut clockwise until free.
3. Pull the blade straight out from the shaft.
4. Wipe the Blade with a damp cloth. If your fan is used in a greasy environment,
such as a kitchen, mild soap or a common household cleaner may be
necessary. Do not use solvents. Do not place blade in the dishwasher. The
excessive heat can distort the plastic.
To reattach blade and front grille, follow reverse of instructions above.
Note: The motor is permanently lubricated and requires no oiling.
English 13