CONTENTS Important Safety Instructions .............................4 Product Information ................................9 Assembly ....................................10 How to Use ....................................11 Remote Control ..................................12 Cleaning ......................................13 Storage ......................................14 Troubleshooting ..................................15 Warranty.....................................16 English...
READ AND SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner.
Page 5
should be placed near furnaces, fireplaces, stoves or other high temperature heat sources. Do not use this product in a window, on an uneven or unstable surface, or near water. - The appliance, power supply, power cord and plug cannot come into contact with water.
Page 6
replaceable parts. - Before plugging power cord into electrical outlet, be sure that all electrical information on the rating label, including voltage, is compatible with your outlet’s power supply. - Do not sit or stand on product. - Never use the cord as a handle or otherwise yank, strain or stretch the power cord.
Page 7
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 8
Supplier’s FCC Declaration of Conformity Unique Identifier: Sharper Image Models SPIN 10, SPIN 12 Responsible Party: Vornado Air LLC Mailing Address : 415 E. 13th St., Andover, KS 67002 Contact: www.sihomecomfort.com WARNING: Batteries may pose a choking hazard. Do not let children handle batteries.
PRODUCT INFORMATION Your product includes the following: Fan Body Side Legs (2) Back Leg (1) (not shown) 24 VDC 1.0A Power Supply/Cord Remote Control (Model SPIN 12 only) English...
ASSEMBLY No tools required. You will need to assemble your SPIN fan. There are two unweighted legs and one weighted leg with your fan. 1. Lay the SPIN on its side, facing forward. Install one unweighted leg on the front of the fan until it securely snaps into place.
HOW TO USE POWER ON / OFF 1. Press ( ) to power unit on. 2. There are three speeds: LOW, MEDIUM, HIGH. 3. Press ( ) to select desired speed or turn unit OFF. 4. Press ( ) to turn Oscillation ON or OFF.
REMOTE CONTROL Model SPIN 12 only. REMOTE FUNCTIONS The remote requires a line-of-sight path to allow for the signal to be received by the circulator. Point the remote control at the control panel for best reception. 1. Press ( ) to power unit ON or OFF. 2.
CLEANING WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grille or blade. GRILLE REMOVAL (Screwdriver required) 1. Power off and unplug unit. 2. Remove 6 screws located at the 12, 2, 4, 6, 8, 10 o’clock positions on the back of the fan head.
STORAGE During the off-season or after extended periods of non-use, you may choose to store your fan. To ensure long life of the product, it is recommended to store your fan by following these instructions: 1. Unplug power cord and bundle loosely. 2.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE AND SOLUTION The unit fails to Unit is not plugged in. power on. Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance. Unit is not pro- Ensure unit is set to highest setting for maximum air circulation. ducing sufficient Allow the unit to fully circulate the air throughout the room, this amount of air.
SATISFACTION G U A R A N T E E Vornado Air, LLC warrants to the original consumer or purchaser this Sharper Image® Fan (“Product”) is free from defects in material or workmanship for a period of two (2) years from the date of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost.
Page 17
Sharper Image® name and logo are registered trademarks. Manufactured, marketed and distributed under license by Vornado Air LLC, Andover, Kansas 67002. Manufactured in China. U.S. Patents Pending. Sharper Image® Distributed under license by Vornado Air LLC, Andover, Kansas 67002. English...
Need help?
Do you have a question about the SPIN 10 and is the answer not in the manual?
Questions and answers