Toshiba RAS-B22PKVSG-TR Service Manual page 54

8. PRESET OPERATION
Set your preferred operation for future use. The setting will be memorized by the
unit for future operation (except air flow direction).
1. Select your preferred operation.
2. Press and hold
displays.
3. Press : Operate the preset operation.
9. AUTO RESTART OPERATION
To automatically restart the conditioner after the power failure (Power of the unit must be on.)
Setting
1. Press and hold the RESET button on the indoor unit for 3 seconds to set the operation.
(3 beep sound and OPERATION lamp blink 5 time/sec for 5 seconds)
Do not operate ON timer and OFF timer.
2. Press and hold the RESET button on the indoor unit for 3 seconds to cancel the operation.
(3 beep sound but OPERATION lamp does not blink)
In case of timer are set, AUTO RESTART OPERATION does not activate.
10. COMFORT SLEEP OPERATION
To save energy while sleeping, automatically control air flow and automatically turn OFF.
Press : Select 1, 3, 5 or 9 hrs for OFF timer operation.
Note: Cooling operation; the set temperature will increase automatically 0.5 degree/hour for 4 hours
(maximum 2 degrees increase).
Heating operation; the set temperature will decrease.
11. COMFORT AIR FLOW
• Wide air flow : Air flows around the room.
• Spot air flow : Air flow is concentrated at one point.
Wide Spot
center left
for 3 seconds to memorize the setting. The
Wide Spot Wide
left center right
Spot Return to
right manually setting
- 54 -
FILE NO. SVM-18033
mark
P