Table of Contents
Advertisement
Safety Precautions
Important Safeguards
1. Read Instructions All the safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions The safety and operating instructions should be
retained for future reference.
3. Cleaning Unplug this equipment from the wall outlet before cleaning it.
Do not use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments Never add any attachments and/or equipment without
the approval of the manufacturer as such additions may result in the risk of
fire, electric shock or other personal injury.
5. Water and/or Moisture Do not use this equipment near water or in
contact with water.
6. Ventilation Place this equipment only in an upright position. This
equipment has an open-frame Switching Mode Power Supply (SMPS),
which can cause a fire or electric shock if anything is inserted through the
ventilation holes on the side of the equipment.
7. Accessories Do not place this equipment on an unstable cart, stand or
table. The equipment may fall, causing serious injury to a child or adult, and
serious damage to the equipment. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit approved by
the manufacturer.
This equipment and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the equipment and
cart combination to overturn.
8. Power Sources This equipment should be operated only from the
type of power source indicated on the marking label. If you are not sure of
the type of power, please consult your equipment dealer or local power
company. You may want to install a UPS (Uninterruptible Power Supply)
system for safe operation in order to prevent damage caused by an
unexpected power stoppage. Any questions concerning UPS, consult your
UPS retailer. This equipment should be remain readily operable.
9. Power Cords Operator or installer must remove power and TNT
connections before handling the equipment.
10. Lightning For added protection for this equipment during a lightning
storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the equipment due to lightning and power-line
surges.
11. Overloading Do not overload wall outlets and extension cords as this
can result in the risk of fire or electric shock.
12. Objects and Liquids Never push objects of any kind through
openings of this equipment as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the equipment.
13. Servicing Do not attempt to service this equipment yourself. Refer all
servicing to qualified service personnel.
14. Damage requiring Service Unplug this equipment from the wall
outlet and refer servicing to qualified service personnel under the following
conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have fallen into the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following the operating
instructions, adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the equipment to its normal operation.
2
E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a distinct change in performance - this
indicates a need for service.
15. Replacement Parts
When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or that have the
same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
16. Safety Check
Upon completion of any service or repairs to this equipment, ask the service
technician to perform safety checks to determine that the equipment is in
proper operating condition.
17. Field Installation
This installation should be made by a qualified service person and should
conform to all local codes.
18. Correct Batteries
Leaving a BATTERY in an extremely high temperature surrounding
environment that can result in an EXPLOSION or the leakage of flammable
liquid or gas. A BATTERY subjected to extremely low air pressure that may
result in an explosion or the leakage of flammable liquid or gas.
Laisser une BATTERIE dans un environnement extrêmement chaud peut
entraîner une EXPLOSION ou une fuite de liquide ou de gaz inflammable.
Une BATTERIE soumise à une pression d'air extrêmement faible peut
également entraîner une explosion ou une fuite de liquide ou de gaz
inflammable.
19. Tmra A manufacturer's maximum recommended ambient temperature
(Tmra) for the equipment must be specified so that the customer and
installer may determine a suitable maximum operating environment for
the equipment.
20. Elevated Operating Ambient Temperature
If installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than room ambient.
Therefore, consideration should be given to installing the equipment in an
environment compatible with the manufacturer's maximum rated ambient
temperature (Tmra).
21. Reduced Air Flow Installation of the equipment in the rack should
be such that the amount of airflow required for safe operation of the
equipment is not compromised.
22. Mechanical Loading
Mounting of the equipment in the rack should be such that a hazardous
condition is not caused by uneven mechanical loading.
23. Circuit Overloading
Consideration should be given to connection of the equipment to supply
circuit and the effect that overloading of circuits might have on over current
protection and supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this concern.
24. Reliable Earthing (Grounding)
Reliable grounding of rack mounted equipment should be maintained.
Particular attention should be given to supply connections other than direct
connections to the branch circuit (e.g., use of power strips).
25. Children
This equipment is not suitable for use in locations where children are likely
to be present.
Cet équipement ne convient pas à une utilisation dans des lieux pouvant
accueillir des enfants.
26. Grounding
The equipment protective earthing conductor should be connected to the
installation protective earthing conductor.
Le fil de mise à la terre de protection de l'équipement doit être connecté au
fil de mise à la terre de protection de l'installation.
Advertisement
Table of Contents
