LG WKGX301H A Series Owner's Manual page 40

40 OPERATION-DRYER
allows you to remove faster-drying lightweight
items or items that you would like to iron or hang
while they are still slightly damp.
Energy Saver
This option helps to reduce the energy
consumption of the Normal Dry cycle, depending
on the load size. When the Energy Saver option is
selected, the cycle begins with an air dry section
and the drying time is increased.
• The Energy Saver option is turned on by default
in the Normal Dry cycle.
• If the Energy Saver option is turned off, it
remains off until it is turned back on.
Low Static
This option injects steam late in the drying cycle to
reduce the static electricity caused by dry fabrics
rubbing together.
Wrinkle Care
Selecting this option will tumble the load
periodically for up to 3 hours after the selected
cycle, or until the door is opened. This is helpful in
preventing wrinkles when you are unable to
remove items from the dryer immediately.
Select this option before you start a drying cycle.
NOTE
• When the option is set, only the Power button
works after the drying cycle ends.
• When a drying cycle is running, pause the cycle
first to set the option.
• Always turn off the appliance before unloading
the clothes.
Settings
1
Press the SETTINGS button.
2
Select the desired settings and adjust them as
needed.
NOTE
• If no action is taken for several minutes after
pressing the SETTINGS button, the display
reverts to the previous screen.
Remote Start
Use a smartphone to control your dryer remotely.
• For more information, see SMART FUNCTIONS
in this manual.
Drum Light
The drum is equipped with a white LED light that
illuminates when the dryer is turned on. This light
automatically turns off when the door is closed
and the cycle starts.
• Swipe the bar to turn on or off the Drum Light.
• The drum light will turn off automatically after 4
minutes.
Dryer Additional Settings
1
Press the SETTINGS button.
2
Scroll down and select the Dryer Additional
Settings.
3
Select the desired settings and adjust them as
needed.
NOTE
• If no action is taken for several minutes after
pressing the SETTINGS button, the display
reverts to the previous screen.
Cycle List Edit
Edit the list of dry cycles that are displayed. Some
dry cycles cannot be deleted from the default list.
Cycle Optimization
When activated, this feature organizes the cycle
list and options automatically based on your usage
patterns.
• On is the default setting.
• Selecting Off retains the current list order.
Signal
The volume of the notification sounds and button
sounds can be set from Off to Very High.
• Default volume is Very High and can be
adjusted.
- Volume : Off, Low, Medium, High, Very High