Operation-Dryer; Using The Dryer - LG WKGX301H A Series Owner's Manual

OPERATION-DRYER

Using the Dryer

WARNING
• To reduce the risk of fire, electric shock, or injury
to persons, read the SAFETY INSTRUCTIONS
before operating this appliance.
Operation Overview
1
Clean the lint filter.
• If the lint filter has not already been
cleaned, lift out the filter and remove the
lint from the last load. This will help ensure
the fastest and most efficient drying
performance. Make sure to reinstall the
filter, pressing down until it clicks firmly into
place.
2
Load the dryer.
• Load the dryer with the wet laundry from
the washer. If the load is extra large, you
may need to divide it into smaller loads for
proper performance and fabric care.
3
Turn on the dryer.
• Touch the Power button to turn on the
dryer.
4
Select a cycle.
• Touch the down arrow next to the cycle
name on the center display to open the list
of cycles, or swipe the screen to scroll
through and select a cycle.
• The preset temperature, dry level, and
option settings for that cycle will be shown.
• Pressing the Start/Pause button without
selecting a cycle immediately starts the
Normal Dry cycle with the default settings.
5
Adjust the settings.
Default settings for the selected cycle can now
be changed, if desired, using the cycle
modifier and SETTINGS buttons.
• Not all modifiers and options are available
on all cycles. If an option or setting is not
available, it is grayed out and will not
respond when touched.
6
Begin the cycle.
• Press the Start/Pause button to begin the
cycle. The cycle can be paused at any time
either by opening the door or by pressing
the Start/Pause button.
• If the Start/Pause button is not pressed
within a certain time, the dryer shuts off
and all settings are lost.
7
End of Cycle
• When the cycle is finished, the chime will
sound. Immediately remove your clothing
from the dryer to reduce wrinkling. If
Wrinkle Care is selected, the dryer will
tumble briefly every few minutes to help
prevent wrinkles from setting in the clothes.
Check the Lint Filter Before Every
Load
Always make sure the lint filter
starting a new load; a clogged lint filter will
increase drying time. To clean, pull the lint filter
straight up and roll any lint off the filter with your
fingers. Push the lint filter firmly back into place.
See Regular Cleaning for more information.
Always ensure the lint filter is properly installed
before running the dryer. Running the dryer with a
loose or missing lint filter will damage the dryer
and articles in the dryer.
OPERATION-DRYER
is clean before
a
29