Troubleshooting - Idis DR-2504P-B Installation Manual

Part 2 - Appendix

Troubleshooting

Problem
The main unit won't turn on.
Unable to display Live video.
PoE-enabled camera will not
turn on.
NVR stopped working in the
middle of a recording.
icon is shown, but video is
not being recorded.
24
• Check the power cable connection status.
• Check the power outlet.
• Check the camera's video cable connection status.
• Check the monitor's video cable connection status.
• Check the camera's power setting.
• Check the camera lens settings.
• Verify that the camera is actually PoE-enabled.
• Check the network cable, replace it, and try again.
• Check the PoE adapter is not defective and power adapter is properly
connected.
• Hard disk may be full. Delete video recordings to free up space.
• Set the NVR to Recycle mode. For more information, refer to the General in
the operation manual.
If the Pre-Event is enabled, the
inprogress, or the and
is in progress. For more information, refer to the Schedule in the operation
manual.
Solution
and icons appears when recording is not
icons appear when an event occurs and recording