Self-Diagnosis Function; Specifications - Sony CPD-G520 Operating Instructions Manual

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the ! (power) indicator will either light up green or
flash orange. If the ! (power) indicator is lit in orange, the
computer is in power saving mode. Try pressing any key on the
keyboard or moving the mouse.
x If the ! (power) indicator is green
1
Disconnect any plugs from the video input 1 and 2
connectors, or turn off the connected computer(s).
Press the ! (power) button twice to turn the monitor
2
off and then on.
3
Hold the control button upward for 2 seconds
before the monitor enters power saving mode.
OK
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor's condition.
x If the ! (power) indicator is flashing orange
Press the ! (power) button twice to turn the monitor off
and then on.
If the ! (power) indicator lights up green, the monitor is working
properly.
If the ! (power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the ! (power) indicator and inform your authorized
Sony dealer of the monitor's condition. Be sure to note the model
name and serial number of your monitor. Also note the make and
model of your computer and graphic board.
22
INPUT PICTURE EFFECT MENU
1 2 OK
! (power) indicator

Specifications

CPD-G520
CRT 0.24 mm aperture grille pitch
21 inches measured diagonally
90-degree deflection
FD Trinitron
Viewable image size Approx. 403.8 302.2 mm (w/h)
(16
19.8" viewing image
Resolution
Maximum Horizontal: 2048 dots
Vertical: 1536 lines
Recommended Horizontal: 1600 dots
Vertical: 1200 lines
Input signal levels Video signal
SYNC signal
Standard image area Approx. 388 291 mm (w/h)
(15
or
Approx. 364 291 mm (w/h)
(14
Deflection frequency* Horizontal: 30 to 130 kHz
Vertical: 48 to 170 Hz
AC input voltage/current 100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
Power consumption Approx. 135 W (with no USB devices
connected)
Dimensions Approx. 497 502 485 mm (w/h/d)
(19
Mass Approx. 30 kg (66 lb 2 oz)
Plug and Play DDC2B/DDC2Bi, GTF**
Supplied accessories See page 6
12 inches)
Analog RGB: 0.700 Vp-p
(positive), 75
H/V separate or composite sync:
TTL 2 k , Polarity free
Sync on Green: 0.3 Vp-p
(negative)
3 1
/ 11 / inches)
8 2
3 1
/ 11 / inches)
8 2
5 7
/ 19 18 / inches)
8 8