Step 2: Connect The Power Cord; Step 3: Turn On The Monitor And Computer - Sony CPD-G520 Operating Instructions Manual

x Connecting to a Macintosh or compatible
computer
Use the supplied exclusive Power Mac G3/G4 adapter.
CPD-G520
2 1
AC IN
video signal cable
to HD15
(supplied)
to video output
exclusive Power
Mac G3/G4 adapter
Power Mac G3/G4
(supplied)*
* Connect the supplied adapter to the computer before connecting the
cable. This adapter is compatible only with Power Mac G3/G4
computers that have 3 rows of pins. If you connect to the other version
of Macintosh series computer that has 2 rows of pins, you will need a
different adapter (not supplied).
x Connecting to a second computer
CPD-G520
2 1
AC IN
Refer to the preceding
examples to connect your
computer.
CPD-G420
2 1
IN
CPD-G420
2 1
IN
to HD15
video signal cable
(not supplied)

Step 2: Connect the power cord

With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
to AC IN
to a power outlet
power cord (supplied)
Step 3: Turn on the monitor and
computer
First turn on the monitor, then turn on the computer.
The installation of your monitor is complete.
If necessary, use the monitor's controls to adjust the picture.
AC IN
GB
(continued)
7