Highway And Transport Operations - Tar River 60 Series Operator's Manual

Rotary tillers
Table of Contents

Advertisement

DO NOT operate near the edge of drop-offs or banks.
DO NOT operate on steep slopes as overturn may result.
Operate up and down (not across) intermediate slopes. Avoid sudden starts and stops.

HIGHWAY AND TRANSPORT OPERATIONS

Adopt safe driving practices:
Keep the brake pedals latched together at all times. NEVER USE INDEPENDENT BRAKING WITH
MACHINE IN TOW AS LOSS OF CONTROL AND/OR UPSET OF UNIT CAN RESULT.
Always drive at a safe speed relative to local conditions and ensure that your speed is low enough for an
emergency stop to be safe and secure. Keep speed to a minimum.
Reduce speed prior to turns to avoid the risk of overturning.
Avoid sudden uphill turns on steep slopes.
Always keep the tractor or towing vehicle in gear to provide engine braking when going downhill. Do not
coast.
Do not drink and drive!
Comply with state and local laws governing highway safety and movement of farm machinery on public
roads.
Use approved accessory lighting flags and necessary warning devices to protect operators of other vehicles
on the highway during daylight and nighttime transport. Various safety lights and devices are available
from your dealer.
The use of flashing amber lights is acceptable in most localities. However, some localities prohibit their
use. Local laws should be checked for all highway lighting and marking requirements.
When driving the tractor and equipment on the road or highway under 40 kph (20 mph) at night or during
the day, use flashing amber warning lights and a slow moving vehicle (SMV) identification emblem.
Plan your route to avoid heavy traffic.
Be a safe and courteous driver. Always yield to oncoming traffic in all situations, including narrow bridges,
intersections, etc.
Be observant of bridge loading ratings. Do not cross bridges rated lower than the gross weight as which you
are operating.
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

40 seriesYct seriesRxtTxgYct-60Yct-66 ... Show all

Table of Contents