During Operation - Tar River 60 Series Operator's Manual

Rotary tillers
Table of Contents

Advertisement

Don't hurry the learning process or take the unit for granted. Ease into it and become familiar with your
new equipment.
Practice operation of your equipment and its attachments. Completely familiarize yourself and other opera-
tors with its operation before using.
Use a tractor equipped with a Roll Over Protective System (ROPS) and fasten your seat belt prior to starting
the engine.
The manufacturer does not recommend usage of tractor with ROPS removed.
Move tractor wheels to the widest recommended settings to increase stability.
Securely attach to towing unit. Use a high strength, appropriately sized hitch pin with a mechanical retainer
and attach safety chain.
Do not allow anyone to stand between the tongue or hitch and the towing vehicle when backing up to the
equipment.
Children should not be allowed on the product.
Clear the area of small children and bystanders before moving the feeder.
If using a towing unit, securely attach feeder by using a hardened 3/4" pin, a metal retainer, and safety
chains if required. Shift towing unit to a lower gear before going down steep downgrades, thus using the
engine as a retarding force. Keep towing vehicle in gear at all times. Slow down for corners and rough ter-
rain.
Make sure you are in compliance with all local and state regulations regarding transporting equipment on
public roads and highways. Lights and slow moving signs must be clean and visible by overtaking or on-
coming traffic when feeder is transported.
Beware of bystanders, particularly children! Always look around to make sure that it is safe to start the
engine of the towing vehicle or move the unit. This is particularly important with higher noise levels and
quiet cabs, as you may not hear people shouting.
NO PASSENGERS ALLOWED - Do not carry passengers anywhere on, or in, the tractor or equipment,
except as required for operation.
Keep hands and clothing clear of moving parts.
Do not clean, lubricate or adjust your equipment while it is moving.
When halting operation, even periodically, set the tractor or towing vehicle brakes, disengage the PTO, shut
off the engine and remove the ignition key.
Be especially observant of the operating area and terrain - watch for holes, rocks or other hidden hazards.
Always inspect the area prior to operation.

DURING OPERATION

5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

40 seriesYct seriesRxtTxgYct-60Yct-66 ... Show all

Table of Contents