Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Tar River DLT Series
Summary of Contents for Tar River DLT Series
- Page 1 Sub-Compact Rotary Tiller DLT & DLT-S Series Operator’s Manual Rev. 11/21...
- Page 2 Sub-Compact Rotary Tiller DLT & DLT-S Series Page left blank intentionally...
- Page 3 Sub-Compact Rotary Tiller DLT & DLT-S Series TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Tar River dealer. Read manual in- structions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Owner’s/Operator’s Manual are completed before releasing equipment to the owner.
-
Page 4: Table Of Contents
Sub-Compact Rotary Tiller DLT & DLT-S Series Table of Contents Introduction …………………………………………………………………………………………….. 5 Technical Specifications ……………………………………………………………………………….. 5 Safety …………………………………………………………………………………………………… 6 Safety Signal Words ……………………………………………………………………………………. 6 General Safety Guidelines ……………………………………………………………………………… 7 Safety Decal Care ………………………………………………………………………………………. 7 Before Operation ……………………………………………………………………………………….. 8 During Operation ……………………………………………………………………………………….. 9 Highway And Transport Operations ……………………………………………………………………... -
Page 5: Introduction
#80 chain drive system to give you years of reliable service. A Slip Clutch PTO protect comes standard. Available in 42” and 50” working widths. The Tar River DLT Series Rotary Tiller is perfect for all your small- tractor tilling needs. -
Page 6: Safety
Sub-Compact Rotary Tiller DLT & DLT-S Series Important Safety Information Safety It is important that you read the entire manual and to become familiar with this product before you begin using it. This product is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification. -
Page 7: General Safety Guidelines
Sub-Compact Rotary Tiller DLT & DLT-S Series Important Safety Information General Safety Guidelines Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. De- signers and manufacturers build in as many safety features as possible. However, every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment. -
Page 8: Before Operation
Sub-Compact Rotary Tiller DLT & DLT-S Series Important Safety Information How to install Safety Signs: Be sure that the installation area is clean and dry. • Decide on the exact position before you remove the backing paper. • Remove the smallest portion of the split backing paper. •... -
Page 9: During Operation
Sub-Compact Rotary Tiller DLT & DLT-S Series Important Safety Information During Operation Children should not be allowed on the product. • Clear the area of small children and bystanders before moving the feeder. • If using a towing unit, securely attach feeder by using a hardened 3/4” pin, a metal retainer, and safety •... -
Page 10: Highway And Transport Operations
Sub-Compact Rotary Tiller DLT & DLT-S Series Important Safety Information Highway and Transport Operations Adopt safe driving practices. • Keep the brake pedals latched together at all times. Never use independent braking with machine in tow • as loss of control and/or upset of unit can result. Always drive at a safe speed relative to local conditions and ensure that your speed is low enough for an •... - Page 11 Sub-Compact Rotary Tiller DLT & DLT-S Series Important Safety Information Highway and Transport Operations Maneuver the tractor or towing vehicle at safe speeds. • Avoid overhead wires or other obstacles. Contact with overhead lines could cause serious injury or • death.
-
Page 12: Operating Instructions
Sub-Compact Rotary Tiller DLT & DLT-S Series Operating Instructions Before attaching the rotary tiller to the tractor, check the unit to ensure there is oil in the top and side gearbox. See Maintenance section for lubricant specifications. Attaching to the tractor 1. - Page 13 Sub-Compact Rotary Tiller DLT & DLT-S Series Operating Instructions Working Depth Adjustment The working depth is controlled by raising or lowering the side skids. If the skids are raised, the working depth increases. By lowering the skids, the tilling depth with decrease. Tailgate adjustment The tailgate can be adjusted to help smooth and compact the tilled ground.
-
Page 14: Maintenance
Sub-Compact Rotary Tiller DLT & DLT-S Series Maintenance Performing Maintenance Good maintenance is your responsibility. Poor maintenance is an invitation to trouble. • Make sure there is plenty of ventilation. Never operate the engine of the towing vehi- • cle in a closed building. The exhaust fumes may cause asphyxiation. •... -
Page 15: Torque Specifications
Sub-Compact Rotary Tiller DLT & DLT-S Series Notes: This chart is an approximate estimate of torque values. Always tighten hardware to these values unless a different torque value or tightening procedure is listed for a specific application. Fasteners must always be replaced with the same grade as specified in the manual. Always use the proper tool for tightening hardware: SAE for SAE hardware and Metric for Metric hardware. - Page 16 Sub-Compact Rotary Tiller DLT & DLT-S Series Page left blank intentionally...
-
Page 17: Parts Breakdown
Sub-Compact Rotary Tiller DLT & DLT-S Series Parts Manual Rev. 11/21... - Page 18 Sub-Compact Rotary Tiller DLT & DLT-S Series DLT Series Rotary Tiller...
- Page 19 Sub-Compact Rotary Tiller DLT & DLT-S Series DLT Series Rotary Tiller Item Part # Description Qty. BM101530 Bolt- M10 x 1.5 x 30 NM1015 Nut- M10 x 1.5 DP1003 A Frame LW10 Lock Washer- M10 DP1005 Lower Suspension Pin DP1006...
- Page 20 Sub-Compact Rotary Tiller DLT & DLT-S Series DLT Series Rotary Tiller...
- Page 21 Sub-Compact Rotary Tiller DLT & DLT-S Series DLT Series Rotary Tiller Item Part # Description Qty. DP1036 Drive Chain-12A DP1037 Oil Seal Gasket OP1615B Oil Filler Plug (Breather)- M16 x 1.5 DP1039 Side Chain Gear Box OP1615 Oil Drain Plug- M16 x 1.5 SNM2415 Spanner Nut- M24 x 1.5...
- Page 22 Sub-Compact Rotary Tiller DLT & DLT-S Series DLT-S Series Rotary Tiller...
- Page 23 Sub-Compact Rotary Tiller DLT & DLT-S Series DLT-S Series Rotary Tiller Item Part # Description Qty. BM101530 Bolt- M10 x 1.5 x 30 NM1015 Nut- M10 x 1.5 DP1003 A-Frame LW10 Lock Washer– M10 DP1005 Lower Suspension Pin DP2006 Input shaft B32010 Bearing- 32010 DP2008...
- Page 24 Sub-Compact Rotary Tiller DLT & DLT-S Series DLT-S Series Rotary Tiller...
- Page 25 Sub-Compact Rotary Tiller DLT & DLT-S Series DLT-S Series Rotary Tiller Item Part # Description Qty. DP1037 Side Gearbox Cover Gasket OP1615B Oil Filler Plug (Breather)- M16 x 1.5 DP1039 Side Chain Gear Box OP1615 Oil Drain Plug- M16 x 1.5...
- Page 26 Sub-Compact Rotary Tiller DLT & DLT-S Series PTO Shaft Item Part # Description Qty. DP1075-40 PTO Yoke - Series 40 DP1076-40 Cross and Bearings - Series 40 DP1079-40 Female Yoke and Tube (tractor end) - Series 40 5SB3007 Safety chain DP1078-40 Male Yoke and Tube (implement end) - Series 40 DP1074F-40...
-
Page 27: Warranty
Sub-Compact Rotary Tiller DLT & DLT-S Series Warranty LIMITED WARRANTY Belco Resources Equipment warrants to the original purchaser of any new piece of machinery from Belco Re- sources Equipment, purchased from an authorized Belco Resources Equipment dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for non-commercial, state, and mu- nicipalities’... - Page 28 Sub-Compact Rotary Tiller DLT & DLT-S Series Page left blank intentionally...
- Page 29 Sub-Compact Rotary Tiller DLT & DLT-S Series Page left blank intentionally...
- Page 30 Sub-Compact Rotary Tiller DLT & DLT-S Series 401 Jeffreys Road Tel: 252-822-7140 Rocky Mount, NC 27804 Fax: 252-787-5855 www.tarrivermfg.com Sales@tarrivermfg.com...