Table of Contents
Advertisement
PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is
preattached. Extra parts may be included.
Ground Screw
(9)–1
5/16" x 2 1/4" Screw (7)–4
1/4" Star
5/16" Star
Washer (12)–4
Washer (10)–10
#8 x 1/2"
Screw (5)–8
3/8" x 1 1/4"
Screw (1)–2
1/4" x 4 1/2" Screw (8)–2
3/8" Star
Washer (11)–8
#8 x 3/4"
Screw (4)–8
3/8" x 1 3/4" Screw (2)–2
3/8" x 2 3/8" Screw (3)–4
7
#10 x 3/4"
Screw (6)–4
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TRAINER 8.5 and is the answer not in the manual?
Questions and answers
My Proform ifit 8.5 treadmill (model PFTL76807.1) turns on but the buttons won't work. When you press any button it generates beeping, but no action.
If the Pro-Form Trainer 8.5 treadmill turns on but only beeps when buttons are pressed, the most likely causes could be:
1. The key is not properly inserted into the console.
2. The console may not be in manual mode or may require an iFIT card if using iFIT features.
3. There may be a console malfunction or software issue.
Check that the key is fully inserted, switch to manual mode if needed, and ensure the console is functioning properly.
This answer is automatically generated