Table of Contents
Advertisement
System setup
Date/Time settings
Set the date/time options.
NTP: Mark up when using the NTP (Network
Time Protocol) server for time adjustment.
Date Format: Select the date display format.
Time Zone: Select your time zone.
Time Server: Select your time server.
The DVR will obtain the average time among
5 public servers (rime.nist.gov, time-a.nist.gov,
time-b.nist.gov, ntp.nasa.gov, clock.isc.org).
Private Time Server: Enter the private time
server's IP address or host name.
Sync. Interval: You can set synchronized
interval with the NTP time server to 1 day, 1
hour, 1 week and 1 month.
Update Settings
Set the update options.
Item: Select the items for updating.
-
PTZ PROTOCOL: Set to PTZ PROTOCOL
update.
-
SYSTEM S/W: Set to SYSTEM S/W
update.
Method: Select the update method.
-
USB: Update from USB memory stick.
-
Network: Update from the update server.
Update Server: Enter the IP address of the
update server.
N o t e :
If you can not update from the update server, check
the TCP/IP options and the IP address of the update
server.
Administrator
Administrator: Enter the new password for the
administrator using the virtual keyboard.
Power User: Enter the new password for the
power user using the virtual keyboard.
Normal User: Enter the new password for the
normal user using the virtual keyboard.
N o t e :
Remember the new password. If you forget the new
password please contact an authorized service
center or the store where you purchased the system.
Buzzer Settings
Select the buzzer options.
Button Beep: Makes a sound when using the but-
tons.
Sensor Buzzer: Makes a sound when an alarm
occurs.
Motion Buzzer: Makes a sound when motion is
detected.
Log Out
Auto Logout: Setting the logout time.
If you mark up the option it will automatically logout
at selected intervals.
Time: You can set the auto logout time to 5
minutes, 10 minutes, 30 minutes or 60 minutes.
Hard Disk
Overwrite: Select the overwrite recording type (Off,
Normal Partition, Event Partition or All). This func-
tion is possible when the selected HDD type has
fully recorded.
Full Warning: When the HDD has overflowed the
warning message is displayed.
Event Partition: Sets the space of event partitions
for event recording.
Get other manuals https://www.bkmanuals.com
57
Advertisement
Table of Contents
