Table of Contents
Advertisement
Recording
Settings concerning normal recording and event
recording.
Ch: Displays the channel number.
Res.: Selects the recording resolution.
Quality: Selects the recording picture quality
(LOWEST, LOW, NORMAL, HIGH or BEST).
Frame Rate: Selects the frame rate. The frame
rate is the number of recorded frames per second.
According to resolution, the frame rate is set
automatically. If you wish to set manually, refer to
the below.
Resolution
352*240
1, 3, 5, 7.5, 15, 20, 30
NTSC
704*240
1, 3, 5, 7.5, 15
704*480
1, 3, 5, 7.5
352*288
1, 3, 5, 6, 12.5, 20, 25
PAL
704*288
1, 3, 5, 6, 12.5
704*576
1, 3, 5, 6
Pre.: Specify the pre-event recording time that
records the situation until the sensor alarm signal
has input or motion has been detected. (OFF, 5,
10, 20, 30, 40, 50 or 60 SEC)
Post: Specify the post-event recording time that
records the situation from when the sensor alarm
signal has input or motion has been detected.
(10, 20, 30, 40, 50 SEC or 1, 2, 3, 5, 10 MINUTE)
Video
Selects the video format to NTSC or PAL according
to your video system format.
1. Select the video format.
2. Select [OK] and press ENTER.
Frame Rate
Get other manuals https://www.bkmanuals.com
The confirmation message is displayed.
After the HDD has been formatted, the system will
reboot.
27
Advertisement
Table of Contents
