Table of Contents
Advertisement
Sensor On:
- ON: Sends an e-mail when a sensor has
occurred.
- OFF: Not used.
Motion Detect:
- ON: Sends an e-mail when an motion detection
has occurred.
- OFF: Not used.
Disk Full:
- ON: Sends an e-mail when the HDD has fully
recorded.
- OFF: Not used.
Admin PW Changed:
- ON: Sends an e-mail when the administrator
password has changed.
- OFF: Not used.
Video Loss:
- ON: Sends an e-mail when a video signal from
the camera has stopped because of a cable dis-
connection or malfunction of a camera.
- OFF: Not used.
Power On/Off:
- ON: Sends an e-mail when power is on or off.
- OFF: Not used.
Mail
Notification
- ON: Notifies the user of unit operating information
by e-mail according to notification settings.
- OFF: The notification function is not used.
The mail options are dimmed.
SMTP Server: Enter the SMTP Server address
using the virtual keyboard.
If notification is set to ON and the SMTP server
option is empty, the SMTP port no., user name, and
password options are dimmed and the options are
not set.
SMTP Port No.: Enter the SMTP Port Number
using the virtual keyboard. Typically the TCP port
used for SMTP is 25. However in some cases it is
better to change this port number for added flexibil-
ity or security. If desired change the port number
(25 or 1025 ~ 65535).
User Name: Enter the user name using the virtual
keyboard.
Password: Enter the password using the virtual
keyboard.
Mail Address (1-4): Enter the mail address using
the virtual keyboard.
You can input up to 4 e-mail addresses.
E-mail Test: Select [E-mail Test] to test send an
e-mail.
N o t e :
The SMTP server, SMTP port no., user name or
password settings are optional. The DVR can send
e-mail directly without the use of an SMTP server or
MTA (message transfer agent). In certain cases all
e-mail should be forwarded to a specific SMTP
server. Specify the server host name or IP address in
such a case. For more detail on SMTP setup, ask
your network administrator and/or mail service
provider.
Emergency
Notification:
- ON: Notifies the emergency agent about unit
operating information according to your notifica-
tion settings.
- OFF: Notification function is not used.
IP/Port No.: Enter the IP/port number of the
emergency agent program using the virtual
keyboard. The factory default port for this function
is 9002. However in some cases it is better to
change this port number for added flexibility or
security. If desired change the port number (1025 ~
65535). You can set up to 9 IP/port numbers.
Get other manuals https://www.bkmanuals.com
33
Advertisement
Table of Contents
