Position The Chassis - Cisco Firepower 1010 FPR1010-NGFW-K9 Hardware Installation Manual

Position the Chassis

Warning
Statement 1040 Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1045 Short-Circuit Protection
This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations.
Warning Statement 1074 Comply with Local and National Electrical Codes
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes.
Position the Chassis
See Desktop-Mount the Chassis, on page 28
Figure 24: Do Not Stack the Chassis
Caution
Do not stack the chassis on top of another chassis. If you stack the units, they will overheat, which causes the
units to power cycle.
Whether positioning the chassis on a desktop, on a closet shelf, or mounting it on a wall, consider the following:
Cisco Firepower 1010 Hardware Installation Guide
22
for information on desktop-mounting the chassis.
Installation Preparation