Configuring Ai Settings; Active And Safe Drive - Dahua MXVR4104-I Series User Manual

Select alarm type.
Auto: After the alarm linkage is configured, when an alarm event occurs, the

corresponding alarm output port triggers an alarm.
Manual: After the alarm linkage is configured, no matter whether there is an alarm

event occurs, the corresponding alarm output port triggers an alarm.
Stop: After the alarm linkage is configured, no matter whether there is an alarm event

occurs, the corresponding alarm output port never triggers an alarm.
Click OK.
Status: Indicates the status of each alarm output port.
and

Configuring AI Settings

AI features include: active and safe drive, face detection and blind spot detection. Only when the AI
feature is enabled and set can the corresponding function take effect.

5.2.1 Active and Safe Drive

5.2.1.1 DSM
DSM alarms mainly include drowsy driving, distracted driving, calling when driving, driver not in
position, wearing infrared-blocking sunglasses, smoking when driving, and camera being shielded.
After being triggered, these alarms require voice broadcast by means of TTS and need to be
uploaded to the platform.
On the main web interface, click AI > Parameters > DSM.
The DSM interface is displayed. See Figure 5-7.
indicates there is not.
Alarm mode
indicates there is an alarm output,
59