Table of Contents
Advertisement
A-B repeat
Point B is automatically set.
Sound
Sound distorted.
Effects do not work.
Humming is heard during play.
No sound.
Menus
The "Setup" menu cannot be
accessed.
Picture abnormal or unviewable
Picture distorted.
Picture size does not fit the
screen.
The television may display
incorrectly or colors appear
faded.
Picture stops. [DivX]
Menu is not displayed correctly.
Auto zoom function does not
work well.
Progressive video
There is ghosting when
progressive output is on.
Pictures not in progressive
output.
Listening to the radio
Noise is heard.
"ST" flickers or does not light.
Sound is distorted.
A beat sound is heard.
A low hum is heard during AM
broadcasts.
≥The end of an item becomes point B when it is reached.
≥Noise may occur when playing WMA.
≥Some audio effects do not work or have less effects with some discs.
≥Advanced Surround do not work if you have changed the play speed.
≥An AC power supply cord or fluorescent light is near the cables. Keep other
appliances and cords away from this unit's cables.
≥There may be a pause in sound when you change the play speed.
≥Audio may not be output due to how files were created. [DivX]
≥Select "DVD/CD" as the source.
≥Cancel program and random play.
≥Some distortion is normal during SEARCH.
≥Ensure that the unit is connected directly to the television, and is not
connected through a video cassette recorder.
≥Change "Source Select" in "Picture Menu". [DivX]
≥Change "TV Aspect" in the "Video" tab.
≥Change the zoom setting.
≥The unit and television are using different video systems.
– Use a multi-system or PAL television.
≥The system used on the disc does not match your television.
– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL60 for viewing on a PAL
television ("NTSC Disc Output" in "Video" tab.)
≥Mobile telephone chargers can cause some disturbance.
≥If you are using a TV indoor antenna, change to an outdoor antenna.
≥The television antenna wire is too close to the unit. Separate the antenna wire
of the television from the unit.
≥Picture may stop if the DivX files are greater than 2 GB.
≥Restore the zoom ratio to "a1.00".
≥Set "Subtitle Position" in "Display Menu" to "0".
≥Turn off TV's zoom function.
≥Use the other preset aspect ratios or manual adjustment.
≥Zoom function may not work well, especially in dark scenes and may not work
depending on the type of disc.
≥This problem is caused by the editing method or material used on DVD-Video,
but should be corrected if you use interlace output. Change "Video Output
Mode" in "Picture Menu" to "480i" or "576i".
≥Select "480p" or "576p" in "Video Output Mode" in "Picture Menu".
≥If the unit is connected to the television through VIDEO OUT or S VIDEO OUT
terminal, output will be interlace even if "PRG" is displayed.
≥Adjust the position of the FM or AM antenna.
≥Use an outdoor antenna.
≥Press [PLAY MODE] to select "Mono".
≥Turn the television off or separate it from the unit.
≥Separate the antenna from other cables and cords.
Page
20
—
—
—
—
20
10
—
15
13
4
20
23
21
—
—
23
—
—
—
—
21
21
—
21
—
20
20
4
4, 5
4, 5
24
—
—
33
RQTV0141
Advertisement
Table of Contents
