Table of Contents
Advertisement
Discs—Using on-screen menus
Other Settings
[DVD-V] ]DVD-VR] To change play speed
Play
Speed
– from "k0.6" to "k1.4" (in 0.1 unit steps)
∫ "Play Menu"
Repeat
(l page 14)
Except [JPEG] [MPEG4] [DivX] ]DVD-VR] (Still
picture part)
A-B
To repeat a specified section
Repeat
Press [ENTER] at the starting and ending
points. Press [ENTER] again to cancel.
Except ]DVD-VR]
[VCD] with playback control (PBC)
To mark up to 5 positions to play again
Press [ENTER] (The unit is now ready to
accept markers.)
To mark a position:
Press [ENTER] (at the desired point)
Marker
To mark another position:
Press [2, 1] to select "¢"l Press [ENTER]
To recall a marker:
Press [2, 1] l Press [ENTER]
To erase a marker:
Press [2, 1] l Press [CANCEL]
≥This feature does not work during program
and random play.
[DVD-V] ]DVD-VR] (except iR/iRW)
Allows you to browse the disc contents and
start playing from the selected position. You
can select either "Intro Mode" or "Interval
Advanced
Mode" (l page 22).
Disc
Review
When you find a title/program to play
Press [1, DVD/CD].
≥This may not work depending on the disc
and the play position.
∫ "Picture Menu"
[DVD-V] ]DVD-VR] [VCD] [JPEG] [MPEG4]
[DivX] (depends on disc)
Normal
Cinema1: Mellows images and enhances
Cinema2: Sharpens images and enhances
Animation
Dynamic
Picture
User (Press [ENTER] to select "Picture
Mode
Adjustment") (l see below)
Picture Adjustment
Contrast
Sharpness
Gamma (Adjusts the brightness of dark parts.)
Depth Enhancer
(Reduces the rough noise in the background
to give a greater feeling of depth.)
20
RQTV0141
detail in dark scenes.
detail in dark scenes.
Brightness
Colour
[DVD-V] ]DVD-VR] [VCD] [JPEG] [MPEG4]
[DivX] (depends on disc)
To select suitable picture quality with your
television
§
480p/576p (progressive)
§
480i/576i (interlace)
Video
Output
When you select "xxx
Mode
confirmation screen appears, select "Yes" only
if connecting to a progressive output
compatible television.
§
The numbers displayed depend on the disc
being played. One of the above numbers is
displayed.
[DVD-V] ]DVD-VR] [VCD] [MPEG4]
[DivX] (depends on disc)
If you have chosen "xxx
(l see above), select the method of
conversion for video output to suit the type of
material.
When you play NTSC disc
Auto1 (normal): Automatically detects the film
Auto2:
In addition to "Auto1", automatically
detects film contents with different
frame rates and appropriately
converts it.
Video:
Select when using "Auto1" and
Transfer
"Auto2", and the video content is
Mode
distorted.
When you play PAL discs, MPEG4 or DivX
video
Auto:
Automatically detects the film and
video content, and appropriately
converts it.
Video:
Select when using "Auto", and the
content is distorted.
Cinema: Select this if the
edges of the film
content appear
jagged or rough
when "Auto" is
selected. However, if the video
content is distorted as shown in the
illustration, then select "Auto".
[DivX] (depends on disc)
When you select "Auto" the constructing
method of the DivX contents is automatically
distinguished and output. If the picture is
Source
distorted, select "I (Interlace)" or
Select
"P (Progressive)" depending on which
constructing method was used when the
contents were recorded to disc.
Auto, I (Interlace), P (Progressive)
§
p" (progressive) and a
§
p" (progressive)
and video content, and
appropriately converts it.
Advertisement
Table of Contents
