Table of Contents
Advertisement
Childproof lock
en
Setting the time
Once the appliance has been connected to the mains
or following a power failure, the clock will flash on the
display. Set the time.
The function selector must be set to the "Off" position.
Use the
or
button to set the time.
A
@
1.
The time will stop flashing.
Confirm by pressing the
2.
The appliance will apply the time you have set.
You can go to the basic settings to specify
Note:
whether or not the time should be shown on the display.
~ "Basic settings" on page 17
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, when the appliance is switched off, touch the
button until the symbol for the time is underlined,
v
and use the
A
or
@
button to change the time.
16
button.
v
AChildproof lock
Y our appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
Notes
You can go to the basic settings to specify whether
■
you want the option to set the childproof lock.
~ "Basic settings" on page 17
If a hob is connected, it will not be affected by the
■
childproof lock on the oven.
After a power cut, the childproof lock will no longer
■
be active.
Activating and deactivating
To activate the childproof lock, the function selector
must be set to the "Off" position.
Press and hold the
D
The symbol for this function will appear on the display.
The childproof lock is now activated.
If a timer duration
Note:
continue to count down. While the childproof lock is
active, the timer duration cannot be changed.
To deactivate the childproof lock, press and hold the
button again for approx. 4 seconds until the symbol
D
goes out on the display.
button for approx. 4 seconds.
has been set, this will
t
Advertisement
Table of Contents
