Using Picture In Picture (Pip) - Sony FD Trinitron WEGA KV-27FS210 Operating Instructions Manual

01US01COV-BR2.book Page 24 Wednesday, April 23, 2003 2:44 PM
Operating Instructions

Using Picture in Picture (PIP)

The Picture-in-Picture (PIP) feature allows you to view two programs simultaneously, one in
the full size "main" picture and one in a small "window" picture.
Displaying Picture in Picture
To use PIP
1
Press the TV button to control PIP with the yellow buttons. Tune your TV to a channel that
you know is currently airing programming.
2
Press to display the window picture.
3
Use the yellow PIP (CH +/-) buttons to change the channel in the PIP window picture.
To check your PIP
1
Press the TV button to control PIP with the yellow buttons. Tune your TV to a channel,
which you know is currently airing programming.
2
Press to turn PIP on, then press
appear in the window picture.
3
Use the (CH +/-) buttons on the bottom of your remote control to select the same channel
in the main picture.
4
Use the yellow PIP (CH +/-) buttons to change the channel in the PIP window picture.
5
Press the yellow
equipment that is connected to any of the VIDEO IN jacks of your TV (connected
equipment to VIDEO 4-5 are not visible in PIP). You should see a different picture in your
PIP window for each piece of connected video equipment. Make sure the connected
equipment is turned on and working when you perform this test.
✍
If you're having problems with PIP, refer to "Connections that affect your ability to use PIP" on
page 26 or see "Troubleshooting" on page 43 for possible solutions.
24
Indicates which
picture is currently
receiving sound
9
Main
picture
. The channel from the main window should now
PIP button to switch the PIP window to the video inputs for other
Channel number of
6
the main picture
2 Channel number
of the window
picture
Window
picture