Using The Remote Control Remote Control Description - Sony FD Trinitron WEGA KV-27FS210 Operating Instructions Manual

01US01COV-BR2.book Page 3 Wednesday, April 23, 2003 2:44 PM
Using the Remote Control
Remote Control Description
A
B
C
D
E
F
G
H
/
I
J
K
Button Description
1 Press to turn off the sound. Press again or press
MUTING
2 SYSTEM OFF Press to turn off the equipment programmed into
L
the remote control. See "Programming the Remote
Control" on page 5.
3 TV/VCR Press to switch between TV and VCR mode. If you
M
have a non-Sony VCR, you will need to program
N
the remote control to recognize your VCR. For
details; see "Programming the Remote Control" on
page 5.
O
4 ANT Press to switch between VHF/UHF input to the
P
(antenna) AUX input.
Q
5 PICTURE MODE Press repeatedly to step through the available video
picture modes: Vivid, Standard, Movie and Pro.
Also available in the Video menu. See "Using the
R
Video Menu" on page 28 for details.
6 SLEEP Press repeatedly until the TV displays the time in
minutes (15, 30, 45, 60, or 90) that you want the TV
to remain on before shutting off automatically.
S Cancel by pressing until Sleep Off appears. While
the Sleep feature is set, press once to view the
T
remaining time.
7 Press to jump back and forth between two channels.
JUMP
U
The TV alternates between the current channel and
the last channel that you selected. JUMP will not
work if any FUNCTION Mode (VCR/DVD, SAT/
CABLE, TV) is activated.
V
8 TV/SAT Press to switch between the TV and SAT (satellite)
inputs when in SAT FUNCTION mode.
Press for a direct selection of Effect settings
(Surround, Off) when the remote is in TV
FUNCTION mode.
See "Using the Audio Menu" on page 29 for details.
9 RESET Press to return to factory settings while in an
on-screen menu.
q; VOL (volume) Press (+) or (-) to adjust the volume.
qa Press to program your remote control to operate
CODE SET
connected video equipment. See "Programming the
Remote Control" on page 5.
to restore sound.
3