Cable Box Connections - Sony FD Trinitron WEGA KV-27FS210 Operating Instructions Manual

01US01COV-BR2.book Page 12 Wednesday, April 23, 2003 2:44 PM
Operating Instructions

Cable Box Connections

Some cable TV systems use scrambled or encoded signals that require a cable box to view all
channels. If you subscribe to that kind of cable service, use this connection. Scrambled signals
coming in to the TV through the cable box cannot be viewed in PIP. If some, but not all, of your
channels are scrambled, consider using the cable box and cable connection (see page 13).
TV and Cable Box
1
From cable/
antenna
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your cable box (see page 5).
❏
To activate your remote press
buttons or CH+/- buttons to change the channels. To do this, first program your remote
control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31).
12
Cable box
2
to operate your cable box and then use the
Rear of TV
1 3
S VIDEO
VIDEO
L
(MONO)
R
0 9