LG VH2-S16W Owner's Manual page 30

MAINTENANCE
30
Clean the outer filter
1
Remove the dust or lint around the filter inlet.
CAUTION
• When the lint drops into the filter inlet, it may
cause degradation of drying performance and
increase in drying time.
2
Pull out the outer filter.
3
Remove the inner filter.
4
Open the outer filter by unfolding in the
direction of the arrow grasping the top edge of
the outer filter.
5
Clean the residual lint using vacuum cleaner or
washing under running water.
• Dry the filter completely if the filter is moist.
Failure to do so, odour may occur in the
appliance.
6
Close them, and reinsert the both lint filters.
CAUTION
• Do not load or remove any clothes when the lint
filter is not in a place. The clothes can drop into
the filter inlet and it may cause the appliance to
malfunction.
Emptying the Water Container
Condensed water is collected in the water
container.
Empty the water container after every use. Not
doing so will affect the drying performance.
NOTE
• If the water container is full, the Empty Water
indicator glows and a chime will sound while the
appliance is operating. If this should occur, the
water container needs to be emptied within the
next hour.
• When the condensed water is drained out
directly through the optional drain hose, there is
no need to empty the water container.
1
Pull out the water container.