LG DL X670 Series Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Dryer
  5. DL X670 Series
  6. Owner's manual

LG DL X670 Series Owner's Manual

Hide thumbs Also See for DL X670 Series:
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
DRYER
Read this owner's manual thoroughly before operating the
appliance and keep it handy for reference at all times.
ENGLISH
DL*X670**
www.lg.com
MFL70442693
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
Rev.00_070622

Advertisement

Table of Contents
loading

Related Manuals for LG DL X670 Series

Summary of Contents for LG DL X670 Series

  • Page 1 OWNER'S MANUAL DRYER Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times. ENGLISH DL*X670** www.lg.com MFL70442693 Copyright © 2022 LG Electronics Inc. All Rights Reserved. Rev.00_070622...

  • Page 2: Table Of Contents

    Final Installation Check 30 OPERATION Before Use Loading the Dryer Control Panel Dry Cycles Cycle Modifiers Options and Extra Functions 45 SMART FUNCTIONS LG ThinQ Application Smart Diagnosis Function 49 MAINTENANCE Regular Cleaning 51 TROUBLESHOOTING FAQs Before Calling for Service 57 WARRANTY...

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Safety for a Dryer WARNING Fire Hazard Failure to follow safety warnings exactly could result in serious injury, death or property damage. Do not install a booster fan in the exhaust duct. •...

  • Page 4: Warning Statements

    IMPORTANT SAFETY INSTRUCTIONS WARNING Risk of Fire Install the clothes dryer according to the manufacturer’s instructions and local codes. Clothes dryer installation must be performed by a qualified installer. • Do not install a clothes dryer with flexible plastic venting materials. If •...
  • Page 5 • If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it immediately, and contact an LG Electronics customer information center.
  • Page 6 • Do not grasp the power cord or touch the appliance controls with wet hands. • Do not modify or extend the power cord. • If the appliance has been submerged, contact an LG Electronics customer information center for instructions before resuming use.
  • Page 7 IMPORTANT SAFETY INSTRUCTIONS • Do not let your hand get pinched when opening or closing the dryer door. Maintenance • Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this Owner’s Manual. Use only authorized factory parts •...

  • Page 8: Product Overview

    PRODUCT OVERVIEW PRODUCT OVERVIEW Product Features The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View Control Panel Lint filters Leveling feet Reversible door Rear View...
  • Page 9 PRODUCT OVERVIEW Product Specifications Model DL*X670** Please refer to the rating label for Electrical Requirements detailed information. Min. / Max. Water Pressure 20 - 120 psi (138 - 827 kPa) 27'' X 30 1/8'' X 39'' (68.6 cm X 76.5 Dimensions (Width X Depth X Height) cm X 99 cm) Maximum Depth with Door Open...
  • Page 10 10 PRODUCT OVERVIEW Stacking kit Side vent kit (Kit No. 383EEL9001B) NOTE • For your safety and extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of unauthorized components or parts.

  • Page 11: Installation

    INSTALLATION INSTALLATION Before Installing Installation Overview Please read the following installation instructions first after purchasing this dryer or transporting it to another location. Choose the proper location. Level the appliance. Vent the appliance. Connect the inlet hose (for steam models) Connect the Gas / Electric dryer.

  • Page 12: Choosing The Proper Location

    12 INSTALLATION Choosing the Proper • For garage installation, you will need to place the appliance at least 18 inches (45.7 cm) above the Location floor. The standard pedestal height is 15 inches (38 cm). You will need 18 inches (45.7 cm) from the garage floor to the bottom of the appliance.
  • Page 13 INSTALLATION Dimensions and Clearances The following clearances are recommended for the appliance. • Additional clearances should be considered for ease of installation and servicing. • Additional clearances should be considered on all sides of the dryer to reduce noise transfer. Installation Spacing for Recessed Area or Closet Installation Description Dimension/Clearance...
  • Page 14 14 INSTALLATION Closet Ventilation Requirements Closets with doors must have both an upper and lower vent to prevent heat and moisture buildup in the closet. One upper vent opening with a minimum opening of 48 sq. in. (310 cm ) must be installed no lower than 6 feet above the floor.
  • Page 15 INSTALLATION Installation Spacing for Cabinet For cabinet installation with a door, minimum ventilation openings in the top of the cabinet are required. Description Dimension/Clearance Depth of Ventilation Opening 7″ (178 mm) Back Clearance 5″ (127 mm) Depth 30 1/8″ (765 mm) Front Clearance 1″...

  • Page 16: Leveling The Appliance

    16 INSTALLATION Leveling the Appliance NOTE • If you are installing the appliance on the optional WARNING pedestal, you must use the leveling feet on the • Use long-sleeved gloves and safety glasses. pedestal to level the appliance. The appliance leveling feet should be fully retracted.

  • Page 17: Installing The Vent Kit

    WARNING • An adapter kit, part number 383EEL9001B, may • Be sure to support the weight of the door before be purchased from your LG retailer. This kit inserting the hinge screws. contains duct components necessary to change the appliance vent location.

  • Page 18: Stacking The Appliance

    18 INSTALLATION Insert the 4" (10.2 cm) elbow through the rear opening and press it onto the adapter duct. Be sure that the male end of the elbow faces down through the hole in the bottom of the dryer. Secure it in place with duct tape. Attach the cover plate to the back of the dryer with the included screw.

  • Page 19: Venting The Dryer

    INSTALLATION Make sure the surface of the washer is clean • To reduce the risk of fire, combustion, or and dry. Remove paper backing from the tape accumulation of combustible gases, DO NOT on one of the stacking kit side brackets. exhaust dryer air into an enclosed and unventilated area, such as an attic, wall, ceiling, crawl space, chimney, gas vent, or concealed...

  • Page 20: Connecting Gas Dryers

    20 INSTALLATION Ductwork • Incorrect or inadequate exhaust systems are not covered by the dryer warranty. Dryer failures or service required because of such exhaust Maximum length No. of systems will not be covered by the dryer of 4-inch Wall Cap Type 90°...
  • Page 21 INSTALLATION Connecting the Gas Supply • This dryer must be plugged into a 120-VAC, 60- Hz. grounded outlet protected by a 15-ampere fuse or circuit breaker. NOTE • Where a standard 2-prong wall outlet is • In the Commonwealth of Massachusetts: This encountered, it is your personal responsibility product must be installed by a licensed plumber and obligation to have it replaced with a...

  • Page 22: Connecting Electric Dryers

    22 INSTALLATION Check all pipe connections (both internal and equipment-grounding conductor must be run external) for gas leaks with a noncorrosive with the circuit conductors and connected to the leak-detection fluid. equipment-grounding terminal or lead on the appliance. • The appliance has its own terminal block that Proceed to Venting the Dryer.
  • Page 23 INSTALLATION Four-Wire Power Cord Reinstall the terminal block access cover. • A UL-listed strain relief is required. • Use a 30-amp, 240-volt, 4-wire, UL-listed power cord with #10 AWG-minimum copper conductor and closed loop or forked terminals with upturned ends. White Wire moved from Ground Screw Hot Leads of Power Cord (Black and Red) Remove the terminal block access cover on...
  • Page 24 24 INSTALLATION Install UL-listed strain relief into the power Power Cord Ground Wire cord through-hole. Ground Screw Thread the 4-wire #10 AWG minimum copper power cable prepared in step 1 through the Three-Wire Power Cord strain relief. • A 3-wire connection is NOT permitted on new construction after January 1, 1996.

  • Page 25: Connecting The Water Inlet Hose

    INSTALLATION Reinstall the terminal block access cover. Terminal block UL-listed strain relief White Wire from Dryer Harness UL-listed 3-wire power cord Hot Leads of Power Cord (Black and Red) Attach the two hot leads (black and red) of the Neutral Wire (White) power cord to the outer terminal block External Ground Wire (if required by local screws.
  • Page 26 1) Connect the straight end of the long leak or burst causing flooding and property hose to the cold water faucet. damage. Contact an LG Customer Information Center for assistance in buying hoses. CAUTION • Periodically check the hoses for cracks, leaks, and wear, and replace the hoses every five years.

  • Page 27: Final Installation Check

    INSTALLATION Test Dryer Heating such as sand and scale from clogging the dryer inlet valve. Gas Models Close the dryer door and press the Power button Connect the long dryer hose to the dryer to turn the dryer on. Turn the knob to select Timed inlet valve tightly by hand and then tighten Dry and press the (OK) button to start the test.
  • Page 28 28 INSTALLATION buildup and free of restrictions allows clothes to Flow Sense LED has not turned on when dry faster and reduces energy use. the cycle ends, the exhaust system is adequate. If the exhaust system is severely NOTE restricted, the Flow Sense LED will turn on.
  • Page 29 INSTALLATION Check for blockages and lint buildup. Error Possible Cause & Solution Code Temp Temperature sensor failure. sensor • Turn off the appliance and call for error service. Humidity Humidity sensor failure. sensor • Turn off the appliance and call for error service.

  • Page 30: Operation

    30 OPERATION OPERATION Before Use WARNING • To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Operation Overview Begin Cycle • Press the Start/Pause button to begin the Clean the Lint Filter cycle.

  • Page 31: Loading The Dryer

    OPERATION Loading the Dryer Rubber and Plastics • Do not dry any items made from or containing rubber or plastics such as: NOTE - Aprons, bibs and chair covers • For the best drying performance and most efficient energy usage, do not overload the - Curtains and tablecloths appliance.
  • Page 32 32 OPERATION Heat Setting Label Directions No Heat / Air...

  • Page 33: Control Panel

    OPERATION Control Panel Control Panel Features Power On/Off Button • Press this button to turn the appliance on and press and hold it briefly to turn it off. • Pressing this button during a cycle will cancel that cycle and any load settings will be lost. Cycle Selector Knob •...
  • Page 34 34 OPERATION Time and Status Display Status Display • The display shows the settings, estimated time remaining, options, and status messages. Flow Sense Indicator • The Flow Sense™ duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust flow from the dryer.

  • Page 35: Dry Cycles

    OPERATION Dry Cycles Turn the knob to select the desired cycle. When you select a dry cycle the default settings will light up in the display. Cycle Guide The appliance automatically sets the dryness level and temperature at the recommended setting for each cycle.
  • Page 36 36 OPERATION Cycle Towels Description Use this cycle for drying towels. Dry Level Default: Normal Available: All Temperature Default: Med. High Available: Med. High Cycle Quick Dry Description Use this cycle to quickly dry a small load of laundry. Time Default: 30 minutes Available: 10 -100 minutes Temperature...
  • Page 37 OPERATION Cycle Heavy Duty Description Use this cycle for drying heavy-duty clothes like jeans or garments that need extra drying. Dry Level Default: Normal Available: All Temperature Default: High Available: High Cycle Air Dry Description Use this cycle to dry all items (such as plastics or rubber) that can be tumble dried without using heat.
  • Page 38 38 OPERATION Cycle Blanket Refresh Temperature Default: Low Available: Low Cycle Low Temp Dry Description Reduces energy consumption. Dry Level Default: Normal Available: Very, More, Normal Temperature Default: Med. Low Available: Med. Low Cycle Overnight Dry Description This energy efficient cycle dries a small load overnight. Dry Level Default: Normal Available: Normal...
  • Page 39 Special Drying Cycles These new or specialized drying cycles can be downloaded to your appliance with a smartphone. Refer to the LG ThinQ smartphone application for a complete list of the cycles available for download. Cycle Wrinkle Prevention...
  • Page 40 40 OPERATION Option Cycle Damp Dry Energy Wrinkle Control Steam Low Static Signal Saver Care Lock Steam † Fresh Heavy Duty Air Dry Steam † Sanitary Super Dry Active Wear Jeans Blanket Refresh Low Temp Overnight † Easy Ironing Small Load Large Load X Large Load Wrinkle...

  • Page 41: Cycle Modifiers

    OPERATION Cycle Modifiers • Use dry level between Normal and Damp or the Damp dry level for items that you wish to iron. About Modifier Buttons Dry Time Each cycle has default settings that are selected automatically. Customize these settings using the Use this button to manually select the drying time, cycle modifier buttons.

  • Page 42: Options And Extra Functions

    42 OPERATION Options and Extra Functions Low Static Use this function to add steam. This function Your dryer includes several additional cycle injects steam late in the drying cycle to reduce the options to customize cycles to meet your individual static electricity caused by dry fabrics rubbing needs.
  • Page 43 Auto Cycle Optimization • The drum light will turn off automatically after 4 function in the Additional Settings menu. In the minutes. LG ThinQ application, use the Product Cycle Management feature. Damp Dry Signal When this option is selected, the appliance signals Additional Settings when the load is approximately 80% dry.
  • Page 44 44 OPERATION Turn the knob to select or change the setting and press the (OK) button to save the setting. To return to the previous screen, press the Options button again or press the (Previous) button. NOTE • If no action is taken for several minutes after pressing the Options button, the display reverts to the previous screen.

  • Page 45: Smart Functions

    • Remote Control - Control the appliance remotely or check to see how much time is left in the cycle from the LG ThinQ application. NOTE • Once the remote control feature is enabled, you Connect your smartphone to the wireless can start a cycle from the LG ThinQ application.
  • Page 46 • The network connection may not work properly depending on the Internet service provider. • The Wi-Fi may not connect or the connection Start a cycle from the LG ThinQ application on may be interrupted because of the home your smartphone.

  • Page 47: Smart Diagnosis Tm Function

    LG ThinQ application. • Launch the LG ThinQ application and select the FCC RF Radiation Exposure Smart Diagnosis feature in the menu. Follow Statement the instructions provided in the LG ThinQ application.
  • Page 48 48 SMART FUNCTIONS Turn the knob to select Smart Diagnosis and press the (OK) button. Place the mouthpiece of your smartphone close to the Power button and press the (OK) button. • Hold the smartphone mouthpiece to the Power button until the data transfer is complete.

  • Page 49: Maintenance

    MAINTENANCE MAINTENANCE WARNING • Unplug the appliance before cleaning. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They will damage the finish. Regular Cleaning Cleaning the Lint Filter Always clean the lint from the filter after every Cleaning the Exterior cycle.
  • Page 50 50 MAINTENANCE If the lint filter has become very dirty or clogged with fabric softener, wash the lint filter in warm, soapy water and allow it to dry thoroughly before reinstalling. NOTE • NEVER operate the appliance without the lint filter in place.

  • Page 51: Troubleshooting

    Scan this QR code to quickly access the video search page on the offical LG website. On the lg.com/us home page, click on the Support menu tab to bring up the menu selections. Select Video Tutorials. Type Dryer in the search box on the new page and click the Search button.

  • Page 52: Before Calling For Service

    52 TROUBLESHOOTING Before Calling for Service The dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the dryer does not function properly or does not function at all, check the following before you call for service.
  • Page 53 TROUBLESHOOTING Problem Possible Cause & Solution The appliance does House fuse is blown, circuit breaker has tripped, or power outage has occurred. not heat. • Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified electrician.
  • Page 54 54 TROUBLESHOOTING Performance Problem Possible Cause & Solution Clothes are wrinkled. Clothes dried too long (overdried). • Overdrying a load of laundry can lead to wrinkled clothes. Try a shorter drying time or use a lower dry level setting and remove items while they still retain a slight amount of moisture.
  • Page 55 TROUBLESHOOTING Problem Possible Cause & Solution Clothes have damp Very large load or very small load. Single large item such as a blanket or comforter. spots after drying. • If items are too tightly packed or too sparse the sensor may have trouble reading the dryness level of the load.
  • Page 56 During Wi-Fi setup, the app is requesting a password to connect to the product (on certain phones). • Locate the network name which starts with "LG" under Settings > Networks. Note the last part of the network name. - If the network name looks like LGE_Appliance_XX-XX-XX, enter lge12345.

  • Page 57: Warranty

    Should your LG Dryer (collectively “Product”) fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG will, at its option, repair or replace the Product. This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only when purchased lawfully and used within the United States including U.S.
  • Page 58 Or by mail: LG Electronics, P.O. Box 240007, Huntsville, AL 35813 ATTN: Customer Service PROCEDURE FOR RESOLVING DISPUTES: ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION.
  • Page 59 Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics, USA, Inc. Attn: Legal Department-Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.
  • Page 60 60 WARRANTY Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by...
  • Page 61 Memo...
  • Page 62 62 Memo...
  • Page 63 Memo...
  • Page 64 LG Customer Information Center For inquiries or comments, visit www.lg.com or call: U.S.A. 1-800-243-0000 1-888-542-2623 CANADA Register your product Online! www.lg.com...

This manual is also suitable for:

Dlex6700b

Table of Contents