Leveling The Appliance; Connecting The Drain Hose - LG VH2-S16W Owner's Manual

Table of Contents

Advertisement

INSTALLATION
12
NOTE
• The appliance performs best at a room
temperature of 23 ℃.
Electrical Connection
• Do not use an extension cord or double adapter.
• Do not overload the outlet with more than one
appliance.
• Connect the appliance to an earthed socket in
accordance with current wiring regulations.
• The appliance must be positioned a place close
to outlet socket so that the plug is easily
accessible.
• Outlet socket must be within 1.5 meters of either
side of the location of the appliance.
NOTE
• Always unplug the appliance after use.

Leveling the Appliance

Checking Leveling
Leveling the appliance prevents unnecessary noise
and vibration. Check whether the appliance is
perfectly level after installation.
• If the appliance rocks when pushing the top
plate of the appliance diagonally, adjust the feet
again.
NOTE
• Timber or suspended type flooring may
contribute to excessive vibration and unbalance.
Re-enforcement or bracing of the timber floor
may need to be considered to stop or reduce
excessive noise and vibration.
• Do not install the appliance on any elevated
surface, stand or plinth as it can become
unstable and fall causing serious injury and
damage.
Adjusting and Leveling the
Appliance
When the appliance is not perfectly level, turn the
adjustable feet until the appliance no longer
wobbles.
• Turn the adjustable feet clockwise to raise or
turn the adjustable feet counterclockwise to
lower from front-to-back, side-to-side and
corner-to-corner.

Connecting the Drain Hose

Installing the Optional Drain
Hose
Normally, condensed water is pumped up to the
water container where water is collected until
manually emptied. Water can also be drained out
directly to a mains drain, especially when the
appliance is stacked on top of a washing machine.
With the connecting elbow or T piece of the mains
drain hose, simply change the water path and re-
route to the drainage facility as below:
1
Separate the anti-backflow lid
container hose
b
or T piece.
2
Attach the anti-backflow lid
the connecting elbow or T piece and then
connect the optional drain hose
and the water
a
from the connecting elbow
to the head of
a
to the
c

Advertisement

Table of Contents
loading

Table of Contents