Fein CCG18-125-10 AS Instruction Manual page 30

30
en
Selection of accessories (figures 17–18).
Use only original FEIN accessories. The accessories must be intended for the power tool
type.
A-1 Wheel guard for cutting, type A
B-1 Wheel guard for grinding, type B
B-2 Wheel guard for grinding, type B (hubbed wheel)
B-3 Safety cover for cutting
1-1 Grinding disc, type 27
1-2 Screwable disc (hubbed wheel)
(use only with mounted wheel guard, use a fitting open-end wrench)
2-1 Cutting disc
(use only with mounted safety cover)
3-1 Flap disc
3-2 Backing pad for fiber sanding sheets, fiber sanding sheets
(mount only with the provided backing-pad clamping unit)
3-3 Backing pad with Velcro, Velcro sanding sheets, sanding fleece with Velcro attachment,
sponges (use a fitting open-end wrench)
4-1 Steel tapered twist brush
4-2 Steel-wire cup brush, flap discs
(use a fitting open-end wrench)
5-1 Diamond hole cutter
(use a fitting open-end wrench)