Fein CCG18-125-10 AS Instruction Manual page 21

21
en
Mounting the auxiliary handle
Fig. 5
(figure 5).
Depending on the working manner, screw
the auxiliary handle right or left on the
power tool.
1.
2.
Auxiliary handle
Mounting the wheel guard (figure 6).
Fig. 6
Insert the wheel guard ensuring that the Protection guard
cams of the opening engage in the grooves
on the power tool.
Press the clamping lever and turn the wheel
guard to the required working position.
3.
Allow the clamping lever to engage.
1.
2.