Air Filter And Air Intake Vent Maintenance; Cleaning The Air Filter - Epson EH-LS650W User Manual

Air Filter and Air Intake Vent Maintenance

Regular filter maintenance is important to maintain your projector. Clean the
air filter when a message appears telling you the temperature inside the
projector has reached a high level. It is recommended that you clean these
parts over a 12,000 hour period. Clean them more often than this if you use
the projector in an environment that is dustier than expected. (Assuming the
projector is used in an atmosphere in which airborne particulate matter is less
than 0.04 to 0.2 mg/m3.)
Attention
If regular maintenance is not performed, your Epson projector will notify you
when the temperature inside the projector has reached a high level. Do not wait
until this warning appears to maintain your projector filter as prolonged exposure
to high temperatures may reduce the life of your projector.
g g Related Links
• "Cleaning the Air Filter" p.75
• "Replacing the Air Filter" p.76
• "Cleaning the Air Intake Vents"

Cleaning the Air Filter

You need to clean the projector's air filters in the following situations:
• The filter or vents get dusty.
a Turn off the projector and unplug the power cord.
p.77
b Slide the air filter cover latch and pull out the air filter cover.
c
Pull the air filter out of the air filter cover.
d Vacuum the front of the air filter (the side with the tabs) to remove any
remaining dust.
75