NEC MultiSync FE700+ User Manual page 11

Controls
OSM (On-Screen Manager) control buttons on the
front of the monitor function as follows:
EXIT
CONTROL L/M
CONTROL -/+
PROCEED
RESET
NOTE: When RESET is pressed in the main and sub-menu, a
warning window will appear allowing you to cancel the reset
function.
When OSM controls are activated, icons are displayed at the top of the
menu. If an arrow (¡) is displayed in a sub-menu, it indicates further
choices are available. To enter a sub, sub-menu, press PROCEED.
01c_english
Main Menu
Exits the OSM menu.
Moves the highlighted
area up/down to select
one of the controls.
Moves highlighted area
left/right to select one of
the controls.
Has no function.
Resets all the controls
within the highlighted
menu to the factory
setting.
English-4
4
Sub-Menu
Exits to the OSM main menu.
Moves the highlighted area
up/down to select one of the
controls.
Moves the bar in the - or +
direction to decrease or
increase the adjustment.
Only executes control or
enters sub, sub-menu.
Resets the highlighted control
to the factory setting.
11.09.2000, 7:57 Uhr