Table of Contents
Advertisement
USING THE APPLIANCE FOR THE FIRST TIME - LANGUAGE SELECTION AND
SETTING THE TIME
For correct use of the oven, when it is switched on for the first time you will have to select the desired
language and set the correct time.
Proceed as follows:
1.
Press
: the display will show the list of the first three available languages.
2.
Press buttons
3.
When the desired language is highlighted, press
After language selection, the display will flash 12:00.
4.
Set the time using buttons
pressed.
5.
Confirm your setting by pressing
SELECTING COOKING FUNCTIONS
1.
If the oven is off, press button
2.
To browse the various possibilities, press buttons
white in the centre of the screen.
N.B.: for the list and description of functions, see the specific table at page 19 and at page 24.
If the induction plate is already properly engaged or whenever the induction plate is inserted,
only Induction Functions and Settings will be accessible through the main menu.
If the induction plate is not engaged into the oven, both standard functions MENU and
induction functions MENU will be accessible.
When the induction plate is inserted or removed, a message indicating correct engagement/
disengagement will be shown on the display.
3.
Select the function by pressing button
pre-set values are those desired, press the start button
change them.
SETTING THE TEMPERATURE/OUTPUT OF THE GRILL (Standard Functions only)
200°C
--:--
TEMPERATURE
COOK TIME
Forced Air
No
--:--
PREHEAT
END TIME
To change the temperature or output of the grill, proceed as follows:
1.
Check that the cursor is positioned next to the temperature value (zone 1); press button
the parameter to be changed: the temperature values flash.
2.
Use buttons
3.
Press button
to confirm and then press
placed on.
4.
Press
to start cooking.
The set temperature can also be changed during cooking by following the same procedure.
5.
At the end of cooking, the end of cooking message is displayed. At this point the oven can be
switched off by pressing
display shows the cooling bar which indicates the temperature inside the oven.
Note: in induction mode temperature will be automatically adjusted by the oven and does not need
to be manually set.
and
to scroll down the list.
and
. To scroll through the numbers more quickly, keep the button
: the display will show the list of functions.
; the display will show the cooking functions.
180°C
TEMPERATURE
Forced Air
No
PREHEAT
to change to the desired value.
, or cooking can be prolonged by pressing
to select it.
: the selectable function is highlighted in
: the cooking settings are displayed on the screen. If the
, otherwise proceed as indicated above to
--:--
COOK TIME
Insert food on level 3
--:--
END TIME
. The display indicates which shelf food should be
EN14
Press
when done
. When switched off, the
to select
Advertisement
Table of Contents
