Advertisement
INSTRUCTIONS FOR USING THE ELECTRONIC TIMER
Electronic timer
Displays
Function selector knob
Setting button: ("set")
Confirmation button ("ok")
"-" "+"
Buttons for changing time (
)
Thermostat knob
Starting the oven
When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display
indicates "12. 0 0".
Selecting and changing the clock time:
1. Press "ok". The time of day flashes on the display.
2. Press button "-" or "+" to set the hour.
3. Press "ok" and "-" or "+" to set the minutes.
4. Press "ok" to confirm.
To change the time:
Press and hold "ok" for 2 seconds until the time flashes on the display. Repeat the steps described above.
Selecting the cooking function:
1. Turn knob
to the chosen function:
2. Turn knob
to select the temperature.
3. Press "ok" to confirm; the oven will switch on. The indicator
temperature is reached.
To change the temperature:
1. Turn knob
and select the desired temperature.
Important notes:
To cancel any selection, turn knob
to "0". Alternatively, press "ok" to switch the oven off, maintaining the previously
selected functions.
Minute minder
Childproof lock
Temperature indicator
Cooking time
End of cooking time
next to
switches off when the selected
Selecting the cooking time:
Select the cooking time (available with any function, except for the special functions) to turn the oven on for a specified
period of time. At the end of the specified time the oven will switch off automatically. The maximum programmed
cooking time is 6 hours.
1. Set the function and the temperature (see chapter: "Selecting the cooking function") up to point 2 without confirming
by pressing "ok".
2. Press "set" (the indicator
on the display lights up next to the cooking time symbol
proceed to select the desired cooking time using buttons "-" or "+".
3. Confirm the selection by pressing "ok"; the oven switches on and the display shows the residual cooking time.
4. To change the previous temperature setting, turn knob
To return to the residual cooking time, wait 5 seconds.
Appearance of
on the display:
Once the set time has elapsed, an acoustic signal is heard and
The oven will switch off automatically.
To change the cooking time, use button "-" or "+". Return to point 3 chapter "Selecting the cooking time".
1. Turn knob
to "0".
The time of day appears again on the display.
To increase the cooking time, use button "-" or "+".
Selecting the end of cooking time
Using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours
and 59 minutes.
1. Proceed as described in points 1 and 2 chapter "Selecting the cooking time"
2. Press "set" to set the end of cooking time: the indicator
3. Set the end of cooking time using button "-" or "+".
4. Press "ok" to confirm the end of cooking time.
The oven will turn on automatically at the end of cooking time minus cooking time: the
above the symbols
will light up.
Minute minder
The timer can only be set when the oven is not in use and allows a maximum setting of 6 hours.
To set the minute minder:
1. Leave knob
on "0". The display shows the time of the day.
2. Press "set". The indicator
next to the symbol
Use buttons"-" or "+" to set the desired time.
3. Press "ok" to confirm the selection.
Once the set time has elapsed:
An acoustic signal sounds and
flashes on the display.
Press "ok": The acoustic signal stops. The time of day appears again on the display.
Childproof lock
:
1. With knobs
and
set to "0", press buttons "ok" and "-" at the same time for 3 sec. the indicator
symbol
lights up.
2. The oven functions will not operate while the childproof lock is activated.
3. To deactivate the lock, repeat the sequence described in point 1.
) and, within 8 minutes,
.
appears on the display.
next to the symbol
lights up.
indicators on the display
lights up.
next to the
Advertisement
