Makita HW001G Instruction Manual page 27

Pipe cleaning hose (10 m/15 m)
CAUTION:
Pay particular attention to the
water jet when using the pipe cleaning hose.
Highly intense water jet is ejected backward. Only
trigger the water jet when the nozzle has been
inserted into the pipe to be cleaned at least up to
the red marking.
► Fig.53
For cleaning and unclogging plumbing and downpipes.
Connecting joint
► Fig.54
A joint to connect with a nozzle from other model.
Some optional nozzles require the connecting joint
(optional accessory) to attach to the trigger gun. Attach
the connecting joint to the trigger gun in the same way
as the nozzle.
► Fig.55: 1. Nozzle 2. Connecting joint 3. Trigger gun
Lance extension
► Fig.56
Pipes to extend the length of the trigger gun. Three
different lengths are available by changing the number
of the pipes to be used.
Extension high-pressure hose
(5 m/8 m/10 m)
► Fig.57
Extension hose to connect the high pressure washer
body with the trigger gun.
Swivel joint
► Fig.58
Prevents the high-pressure hose from being twisted.
► Fig.59: 1. Button 2. Nut
To connect or disconnect the high-pressure hose to or
from the swivel joint, turn the nut on the high-pressure
hose while pressing the button on the swivel joint.
Hose assembly
► Fig.60
A hose assembly to connect a faucet to the product, or
the strainer assembly to the product.
Strainer assembly
► Fig.61
A strainer assembly to supply water from a tank or
reservoir. Use the hose assembly to connect to the
product.
27 ENGLISH